"I also believe that the exception Peter refers to in R316.5.11 is an exception to the thermal barrier requirement. So if you don't meet those criteria for an exception (thickness of foam, density, or flame spread) then you just install the…"
"I have seen this done well too and may be the best cost effective approach considering the insulation is in good condition. It does have value if installed like it was meant to be. Air tightness is the indicator of success. If you are good with…"
"Best practice would be to remove the old poorly installed stuff to gain access for comprehensive air sealing, eave vent baffle installation, chimney air seal and insulation dams, etc. and then re-insulate with blown in. If best practice is not your…"
"Agree that its hard to help without more information. Pictures? IR images? Do IR images show air bypass or insulation voids? or both?
If its T&G with exposed beam rafters it would suggest the T&G is the roof sheathing as well as the finish…"
"The residential stuff is thicker than normal foil but not as rugged as sheet metal. It could certainly be damaged if scraped or dented in transport. I've never seen the commercial grade stuff with 4 mil surface. "Embossed" might be…"
"Taped seams would be pretty obvious. I have seen vinyl 'T' strips used at seams which look decent.
For a glimpse of what this product looks like on foundations check this out,
"That would probably go into the category of "ask your local code official". I think the same rule applies to walls and ceiling, which is equivalent thermal barrier to 1/2" drywall. We see it used here on foundation walls and ceilings…"
"You could infill between purlins against metal roof with cheaper foil faced poly-iso in addition to the white finish Thermax insdie of that to get better R-value if needed. Could be a better air sealing effort of you did this as canned foam can be…"
"I'd work on the inside. 2.5" Thermax white finish polyiso can be left exposed and looks decent (better than bottom of metal roof), provides proper thermal/fire barrier (at least here it does), can be air sealed at seams and seams covered…"
Welcome to Home Energy Pros Forum. Feel free to join the conversation in the Forum and Groups. And share your energy efficiency photos, videos and upcoming events. If you're blogging about home performance, this is the place for…"
Building energy modeler, Educator / Trainer, Energy auditor / assessor / analyst, Energy efficiency / Weatherization program administrator or implementer / evaluator, Non-governmental organization, Utility representative
BPI, HERS Rater, Home Energy Score Qualified Assessor, RESNET
Making Buildings Better
Comment Wall (1 comment)
You need to be a member of Home Energy Pros Forum to add comments!
Welcome to Home Energy Pros Forum. Feel free to join the conversation in the Forum and Groups. And share your energy efficiency photos, videos and upcoming events. If you're blogging about home performance, this is the place for you!
Using our heat exchangers we can save 60-90% of your heating and hot water bills We supply heat exchangers for central heating, hot water, swimming pools, hot tubs, jacuzzis and dairy farms Unlike other systems this means NO extra electricity costs,…