My training center is presently training the new BPI installer certification.Is anyone else training this course? What is your impression? Have you developed your own curriculum or are you using NYSERDA's curriculum? We are using BPI's props and we are having some issues. Are you having issues with the props too? Any feedback you may have on how the training is structured? Thanks...

Views: 636

Replies to This Discussion

Hey Matt-

We're offering this course monthly, using our own curriculum.  One thing I've done is limit the class size to 4 people.  I like to make sure they're comfortable both passing the exam and actually using these techniques in the field, and with a big class that's tough.  We can do it in 3 days, both airsealing and dense pack.

www.BuildingPerformanceWorkshop.com/training/installer

Thanks Corbett, We have our training setup for a class size of 6 and we use two proctors for the testing.NYSWDA's training center does not in most cases allow trainers to proctor those people that they just trained.  I train the class then two proctors test the class on the 5th day (3 trainees per proctor). We use NYSERDA's curriculm and it breaks down to this:

Monday- Building Science Module

Tuesday- WHALCI

Wednesday-WHALCI

Thursday- WHALCI

Friday- Testing 

So far so good but the props are taking a beating. Depending on the demand we may go to class size of 12 with 3 proctors on test day. I will also need an extra trainer on class days. How's the demand on your end? Is it a required certification in your state?

Corbrett, Are you using the BPI props?

 

Corbett, is the WHALCI mandatory in the new HPwES program there in Ill?

Matt,

We are offering WHALCI at our training facility and the one thing that I did to save the props was make the boxes and flat portions out of 3/4 melamine. The foam sticks very well to the surface. Once it's tested, the foam that is left on the reusable prop can easily be scraped off with a putty knife. I've been using the same props for over a year now and no problems.

Also, as far as I know, ILHPwES is not requiring the installers to be WHALCI certified. They are requiring the Analyst and Envelope Certs for the contractors.

Craig, Thanks. I'll keep your melamine tip in mind. Our props are beat to hell and I will have to replace them shortly.

Hey Matt and Corbett,

My name is Jason Scheurer, and I travel around the country teaching this curriculum for the past year or so and the props do take a beating. But we have noticed if you use the log sealer such as BPI recommends, the sealants come off easier. We  have gone to the Melamine way of things and it works even better. I am an Independent approved Super Proctor for BPI in BA, EP, RBE-WHALC, MF. I usually have up to (12) students in the class for (3) days of training, then another proctor comes in for (3) days and tests up to (4) students per day. We will switch off from training and proctoring since this is the new protocol for BPI. If any of you guys need help with training or proctoring, I am available.

Where did you find that information "log sealer, such as BPI recommends"?

Hi Debra,

NYSWDA tested a number of release agents about 3 years ago and pioneered the use of wax emulsion (log sealer) for their props. One brand is made by UC Coatings and is called Anchorseal which works well to allow foam to release from wood. If you have a lot of area to cover, you can use a garden sprayer to apply it, but a brush is better in most cases.

They also make Bates which works well to allow mastic to release from duct work. 

Thank you.

RSS

Discussion Forum

Protecting presentations

Started by Paul Raymer. Last reply by Tom Wilson May 6. 6 Replies

Curriculum Developers Wanted

Started by Isaac Savage Aug 13, 2014. 0 Replies

Looking for Trainers in the Northeast

Started by Gary Baggett Feb 14, 2014. 0 Replies

2013 Manual-S Speedsheet Now Available

Started by Isaac Savage Apr 7, 2013. 0 Replies

Conflict Resolution

Started by Chase Counts. Last reply by Rodney Purnell Oct 17, 2012. 7 Replies

Mentors, What Serves As a "Compass"?

Started by David Eggleton. Last reply by David Eggleton Aug 31, 2011. 1 Reply

Home Energy Trainer's Conference Speakers Listed

Started by Jennifer Luitwieler Aug 17, 2011. 0 Replies

Commercial Energy Services---Commercial Audit Training?

Started by Donna Sanders. Last reply by Donna Sanders Jul 5, 2011. 6 Replies

ACI's National Trainer's Conference

Started by Jennifer Luitwieler Jun 22, 2011. 0 Replies

Latest Activity

Steve Taylor replied to Steve Taylor's discussion Moving sale - reduced in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"I do still have it."
13 hours ago
Noah Ray Sanders replied to Steve Taylor's discussion Moving sale - reduced in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"Do you still have the DB with DG 1000"
14 hours ago
Chris Stratton posted a discussion

Okay to use 1" polyiso as a insulation base for 50 gallon heat pump water heater?

I am about to install a 50-gallon Rheem heat pump water heater in our garage at our house near…See More
15 hours ago
Noah Ray Sanders posted a discussion

Foam/Fiberglass Hybrid Insulation

Does anyone have any knowledge of installing fiberglass in the walls and foam insulating the attic…See More
yesterday
Diane Chojnowski's video was featured

2X CODE INSULATION - Simple Trick!

In this episode Matt is visiting a nearly 100 year old Bungalow being re-built to Passive House standards. Architect Trey Farmer is building his family home and has some great tricks to double the insulation of a standard code built home without…
Friday
Elmec is now a member of Home Energy Pros Forum
Friday
Ed Minch commented on Blake Reid's blog post Blower Door Testing in Hawaii
"Glad to see they went with 5 ACH50.  This is very easy to achieve in even small houses and…"
Thursday
Building Performance Institute shared Chris Dorsi's discussion on Facebook
Thursday

© 2019   Created by Building Performance Association   Powered by

Badges  |  Report an Issue  |  Terms of Service