This course will help you study for the ICC Residential Energy Inspector exam and implement the IECC code. The course covers most of the significant new requirements for the 2012 IECC but is not a substitute for being familiar with the 2012 IECC code book. You can take the course at your own pace, and have 90 days to complete. When finished, we will provide you with information to help you arrange your certification exam.

Topics Covered:
- The history of energy codes and their importance
- The identification of the IECC compliance requirements to ensure:  
   - Building envelope tightness
   - Quality insulation installation
- Notable differences between 2009 & 2012 IECC
- The setup & use of a blower door to measure air leakage in the building envelope
- How to calculate ACH50 & determine whether the home meets the minimum Building Envelope Tightness Limits set forth in the both the 2009 & 2012 IECC
- The setup & use of a duct tester to measure air leakage in the duct system
- How to quantify duct leakage & determine whether the duct system meets the minimum requirements set forth in both the 2009 & 2012 IECC

To know more about this class, visit us at: 
http://www.greentrainingusa.com/icc-residential-energy-inspector.html

For questions, please call 1-800-518-1877 or e-mail us at kellyc@greentrainingusa.com.

Views: 81

Latest Activity

Profile IconKevin M Dugan, Daniel Haydon and Patty Hoffman joined Home Energy Pros Forum
18 hours ago
Darin Pleines replied to John Lile's discussion Air Sealing Manufactured Home
"In illinois WAP program we seal the belly material and lightly dense pack the cavity with loose…"
19 hours ago
Brian Robinson replied to John Lile's discussion Air Sealing Manufactured Home
"The first place to look when working on trailers / manufactured home is the…"
21 hours ago
tedkidd replied to John Lile's discussion Air Sealing Manufactured Home
"Spray foam the road barrier."
21 hours ago
Tom Wilson replied to John Lile's discussion Air Sealing Manufactured Home
"The good news is the linoleum IS the air/vapor barrier and unless it is put under 50 Pa negative…"
21 hours ago
Kyle Baker posted a discussion

Solar ROI Calculator

How do you know when you get a payback on installing a solar system? What ROI have you received…See More
21 hours ago
Robin Henry replied to John Lile's discussion Air Sealing Manufactured Home
"Sorry if I'm preaching to the choir but careful sealing up mobiles too tightly as they are…"
22 hours ago
Tom Wilson replied to John Lile's discussion Air Sealing Manufactured Home
"Typo corrections: This is the classic problem folks have been wrestling with forever with…"
22 hours ago
Ed Minch replied to John Lile's discussion Air Sealing Manufactured Home
"Many of the WAP programs have written extensively on sealing of these guys.  West Virginia in…"
22 hours ago
Tom Wilson replied to John Lile's discussion Air Sealing Manufactured Home
"This is the classic problem folks have been wrestling with forever with manufactured…"
22 hours ago
Rich Mialki Jr replied to John Lile's discussion Air Sealing Manufactured Home
"Does this really matter much?  Think of what the blower door is doing as opposed to natural…"
22 hours ago
Emily Ambrose's blog post was featured
yesterday

© 2019   Created by Building Performance Association   Powered by

Badges  |  Report an Issue  |  Terms of Service