BPI's April Stump the Chump: What’s Wrong with this Picture?

We know, we know. There’s a lot right with this picture, such as the gorgeous view of Lake Tahoe in the background and the awesome powder for skiing. But from a whole-house-as-a-system perspective, what’s wrong with this picture? What is the owner trying to do, and what would be a better solution?

Thanks to our own Larry Zarker, BPI CEO, for sending in this dandy shot. He offers the following Winston Churchill quote to explain what’s going on here: “You can always trust the Americans to get it right, after they have exhausted every other possibility”.

Think you know what the problem is, as well as the solution? Send it to us at lmcdowell@bpi.org.

 

Tags: April, Chump, Stump, building, newsletter, performance, the

Views: 543

Reply to This

Replies to This Discussion

Problem is Ice Dams.  The home most likely had melting of roof snow which then refroze and created ice dams possibly causing water damage or excessive ice buildup at roof edges. This caused the homeowner to install energy intensive heat strips to melt the ice dams and jack their electric bill through the roof during snow events.  

 

This is caused by:

1)      Air leakage from penetrations near exterior wall

2)      Heat sources close to exterior wall such as heating ducts or recessed lighting cans

3)      Insulation in contact with roof sheathing causing thermal bridging to roof deck

4)      Lack of soffit ventilation

 

The solution:

 

1)      Air seal exterior top plate with spray foam. It is also important to air seal any other penetration which is delivering heat to the underside of the roof deck.

2)      If recessed lighting is installed near exterior walls, the cans should be ICAT rated to prevent air flow through the fixture. An inexpensive air tight trim kit may also be purchased to avoid changing out fixture itself. Heating duct boots can be sprayed with 2 part foam to prevent heating of roof deck.

3)      Install soffit ventilation at code recommended level at EVERY BAY that is affected.

4)      Install insulation baffles at all soffit edges in order to provide a path for ventilation and carry away any remaing heat transferred from house and cool roof deck. This also prevents insulation from contacting the roof deck (causing thermal bridging).

 

Since it is often difficult to get full insulation amounts at the soffit edge due to clearance, an optimal solution would involve installing ventilation baffles and using spray foam insulation against the baffle and as far in until a full amount of blown insulation may be used. This solution also seals any air exfiltration through the wall top plate at the same time. 

 

 

Oh, and most likely, this is the north facing roof your looking at, unless you have tons of winter shade on the southern exposure.

Congratulations to Craig Bird of Preston Insulation in Tucson, Arizona for winning last month’s “What’s wrong with this picture?”contest. Craig was not only the first person to send in the correct answer. His answer was far and away the most comprehensive, and dare we say, the most elegant in illustrating what in the world of home performance was wrong with the picture, and what should be done about it.

The picture shows a snow-bound house in front of Lake Tahoe, its roof zig zagged with heat strips.  Says Craig:

“The problem is ice dams.  The home most likely had melting of roof snow which then refroze and created ice dams possibly causing water damage or excessive ice buildup at roof edges. This caused the homeowner to install energy intensive heat strips to melt the ice dams and jack their electric bill through the roof during snow events.  

 

This is caused by:

1)     Air leakage from penetrations near exterior wall

2)     Heat sources close to exterior wall such as heating ducts or recessed lighting cans

3)     Insulation in contact with roof sheathing causing thermal bridging to roof deck

4)     Lack of soffit ventilation

 

The solution:

1)     Air seal exterior top plate with spray foam. It is also important to air seal any other penetration which is delivering heat to the underside of the roof deck.

2)     If recessed lighting is installed near exterior walls, the cans should be ICAT rated to prevent air flow through the fixture. An inexpensive air tight trim kit may also be purchased to avoid changing out fixture itself. Heating duct boots can be sprayed with 2 part foam to prevent heating of roof deck.

3)     Install soffit ventilation at code recommended level at EVERY BAY that is affected.

4)     Install insulation baffles at all soffit edges in order to provide a path for ventilation and carry away any remaining heat transferred from house and cool roof deck. This also prevents insulation from contacting the roof deck (causing thermal bridging).

 

Since it is often difficult to get full insulation amounts at the soffit edge due to clearance, an optimal solution would involve installing ventilation baffles and using spray foam insulation against the baffle and as far in until a full amount of blown insulation may be used. This solution also seals any air exfiltration through the wall top plate at the same time. 

RSS

Latest Activity

Profile IconAnnette Shimer and BillJackson joined Home Energy Pros Forum
11 hours ago
Diane Chojnowski replied to Jacob Corvidae's discussion The problems with gas stoves
"Great article. Thanks for posting."
yesterday
Brett Little posted an event

​​Exploring the Benefits and Logistics of Implementing a Building-wide Water Monitoring System - Free CE Webinar at Webinar Online

June 19, 2019 from 12pm to 1:15pm
Water rates are spiking across the country and the recent report from the Water Research Foundation…See More
yesterday
Jacob Corvidae posted a discussion

The problems with gas stoves

Here's the NYT article about the emerging problems around gas stoves: …See More
yesterday
Profile IconElizabeth Brown, Eric P. Wilson, Zaheen Hussain and 2 more joined Home Energy Pros Forum
yesterday
David Butler replied to Rob Madden's discussion Where is the money in energy auditing / home rating?
"Ok, now I understand. I think that happens pretty much everywhere. But forgoing energy retrofits at…"
Friday
Leslie Jackson commented on Leslie Jackson's blog post Introducing a Retrofit Series
"Thanks, Jan, Did you write yours up anywhere? I would love to see the before-and-afters."
Friday
Jan Green commented on Leslie Jackson's blog post Introducing a Retrofit Series
"Looking forward to the follow up.  I Just did one of these.  You never know till you…"
Friday

© 2019   Created by Building Performance Association   Powered by

Badges  |  Report an Issue  |  Terms of Service