Greetings everyone,

   I have a strange scenario to model and I was hoping I could get some advice: This used to be a whole building built on 1,920 so it is a balloon framing. The homeowner' s apartment is on the second floor, but the front door on the first floor has a little area with a little "receiving" table and that area is heated with a radiator. The basement ceiling has no insulation at all and because of the framing style, it brings a great deal of air into the 2 floor (proved by the blower door) 

   The entire house is two floors plus attic, but I am modeling a little piece of the first floor, second floor, attic and basement... Any suggestions on how to do this?

  Your comments are greatly appreciated,

                              Luis

Views: 198

Replies to This Discussion

Paul, Good Evening, John here, did you ever get an answer from anyone to this question?  I am fairly new to TREAT but I am willing to discuss this if it still matters to you?

John@jwlasso.co.uk

Boy, Luis, sorry to see this so late.

Curious what you did.  Our general approach would be to model only the surfaces in the apartment  that are adjacent to unconditioned space, so leaving off floors and walls that are adjacent to the neighboring apartments.

What approach did you use?

Ethan 

RSS

Discussion Forum

Basic Heat loss information

Started by Luis Hernandez. Last reply by tedkidd Oct 30, 2014. 1 Reply

How to model a skylight

Started by Luis Hernandez. Last reply by Luis Hernandez Oct 16, 2014. 2 Replies

Modeling the apartment upstairs

Started by Luis Hernandez. Last reply by Ethan MacCormick Sep 26, 2014. 2 Replies

Modeling a Townhouse

Started by Luis Hernandez. Last reply by Luis Hernandez Jul 7, 2013. 4 Replies

Modeling attics slopes for foam.

Started by Paul Lasicki. Last reply by tedkidd Aug 23, 2012. 4 Replies

Improvement Question

Started by Paul Lasicki. Last reply by randy tolowski Mar 21, 2012. 5 Replies

line volt(age) thermostats

Started by Jan E. Graveamker. Last reply by Amber Harris Feb 27, 2012. 1 Reply

Treat descriptions

Started by Paul Lasicki. Last reply by Amber Harris Feb 27, 2012. 1 Reply

Truing up

Started by Paul Lasicki. Last reply by Paul Lasicki Feb 16, 2012. 4 Replies

Latest Activity

David Butler replied to Don Fugler's discussion Depressurization/make-up air issues in the group Kitchen Ventilation
"Thanks for your thoughtful reply, Brennan. My point about the load impact on tight homes with…"
2 hours ago
Brennan Less replied to Don Fugler's discussion Depressurization/make-up air issues in the group Kitchen Ventilation
"David, I know the pressure reaches static levels quickly. I meant, how quickly then does radon…"
5 hours ago
David Butler replied to Don Fugler's discussion Depressurization/make-up air issues in the group Kitchen Ventilation
"@Brennan, there's virtually no lag. When an exhaust fan comes on, the pressure differential…"
7 hours ago
David Butler joined Don Fugler's group
Thumbnail

Kitchen Ventilation

In many homes, cooking is the largest indoor source of air pollutants. Exposures can be higher in…See More
7 hours ago
Tom Phillips replied to Don Fugler's discussion Depressurization/make-up air issues in the group Kitchen Ventilation
"Hi Don:  good questions, as usual. Would be great to routinely get depressurization data…"
10 hours ago
Glen Gallo replied to Rob Madden's discussion Determining Duct Leakage based solely on blower door and pressure pan testing
"delta q works cool graph does return a supply leakage sometimes it has a hard time reaching smooth…"
10 hours ago
Tom Phillips liked Don Fugler's discussion Depressurization/make-up air issues
11 hours ago
Brennan Less replied to Don Fugler's discussion Depressurization/make-up air issues in the group Kitchen Ventilation
"Hi Don, great sequence of questions, and a couple of thoughts. Overall, I just don't see…"
11 hours ago

© 2019   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service