Assessing the true end user price of installing a new boiler?

Hi there, I often get quizzed over the true cost to the user of installing a new boiler.  It seems to me consumers do not understand the costs around buying and installing a new boiler. You have companies who sell boilers and companies that sell and install boilers.  You have local boiler installers as well national companies.  You now even have websites such as http://www.boilersprices.co.uk/ideal-boilers-prices/vogue-combi/ trying to make sense of pricing within the sector! Can someone advise how pricing within the sector is regulated?   It seems consumers have a trust issue with regards to engineers and pricing.

Tags: boiler, pricing, regulations

Views: 364

Attachments:

Reply to This

Replies to This Discussion

From my understanding there regulated through the free market process. Just remember, you get what you pay for.

If your question is the cost of the new Boiler + installation + the cost of the fuel it will burn, In X building , in Y given geographic location, with Z insulation level,  compared with a different efficiency boiler over XX years at YY interest rate.

Then that is a very complex calculation that will change with each of the listed variables and dozens not listed.

The US government   has released a computer program to do the calculation learning the program, entering the data, and interpreting the output will require about 30 hours of your time.  

https://beopt.nrel.gov/

 

It is best for consumers to get several bids for similar equipment. Discard any bids more than %15 above or below the average as they are very likely flawed and then pick the remaining vendor you liked best.

 

WaltA

When it comes to a topic as complex as a heating system, it is foolish to rely solely on bid prices to make a choice. Unfortunately for the consumer, the majority of contractors are very brief in their description of what they will provide for their bid. You have to look at the specifications, such as -brand and model- is it a reliable one? are parts readily available? Will the installer also maintain the system? Is he/she factory trained on that brand/model?

-Is the model chosen the best choice and most efficient for the application? (look at the yellow EPA efficiency label)

-will it include new ECM circulators?

-Is everything needed included? such as electrical or control wiring, permits, if a condensing boiler is a pH neutralizer included?

-will they check feed water chemistry and add treatment as needed? (many contractors are not paying attention to boiler water chemistry, which may not cause problems now, but can clog everything up in roughly 3-10 years)

-will the boiler or furnace be properly commissioned, as described in most IOMs?

Also keep in mind that the more complex the boiler (such as condensing and modulating boilers/furnaces), the more important it is for annual service, and the more the service and repairs will cost.

There are so many factors when calculating the cost of a new boiler.

It's not quite as simple as boiler + labour = final cost.

You'll need to consider other extras, such as flue types, plume kits, gas runs, filters, controls and chemical flushes (see https://heatable.co.uk/boiler-advice/how-much-do-new-boilers-cost) - There's a large breakdown on all of the factors.

Looking at the cost of a boiler alone, online, is deceiving.

I hope that helps.

We are considering moving to a less transparent model which may seem bizarre but it's due to requests from our partner installers.

RSS

Forum Discussions

HIRING TECHNICIANS!

Started by CMC Energy Services in General Forum 4 hours ago. 0 Replies

The problems with gas stoves

Started by Jacob Corvidae in Best Practices. Last reply by Diane Chojnowski on Saturday. 1 Reply

Heat and A/C on a boat

Started by Ed Minch in HVAC. Last reply by John White Jun 4. 3 Replies

Worst boiler ever?

Started by Mark Furst in General Forum. Last reply by Minnie Coleman Jun 3. 6 Replies

Where to spend my marketing dollars?

Started by Trip Smith in Marketing. Last reply by Alan Bine Jun 1. 11 Replies

How to Insulate Exposed Outdoor Ductwork?? Help

Started by Daniel Baur-McGuire in General Forum. Last reply by Ed Fritz May 23. 9 Replies

Latest Activity

Profile IconLee Blumenfeld, Joe Sanfilippo and 2 other members joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
2 hours ago
CMC Energy Services shared their discussion on Facebook
4 hours ago
CMC Energy Services posted a discussion

HIRING TECHNICIANS!

Great opportunity to join a growing company!  Now hiring Technicians who will perform energy…See More
4 hours ago
CMC Energy Services joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
6 hours ago
Joe Sanfilippo added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

Krendl MS 1000 Spray Cellulose machine and 75KW John Deere Diesel Generator with 1998 F700

This setup is too big for our operation. Truck runs great with a cummins 5.9 and 6 speed manual…See More
8 hours ago
Ned Van Nostrand added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

2005 Ford Econoline 150

Sieda Community Action Weatherization has a 2005 Ford Van for sale.  59,900 miles.  Fairly decent…See More
9 hours ago
Lamont Thompson replied to Jimothy Whisnant's discussion 2-Minneapolis Blower Doors w/DG700’s and 2-Ductblasters w/DG700’s $5000 in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"Does the $1000 cover the dg700 with the duct blaster??? Can you post pics of the equipment…"
13 hours ago
Profile IconPreston Shimer, CMC Energy Services, Lee Blumenfeld and 1 more joined Home Energy Pros Forum
20 hours ago

© 2019   Created by Building Performance Association   Powered by

Badges  |  Report an Issue  |  Terms of Service