Mark Furst's Discussions (21)

Discussions Replied To (18) Replies Latest Activity

"Sounds like a case of "old habits die hard". The sub contractor was probably just in…"

Mark Furst replied Sep 5 to Baffles without soffit vents?

14 Sep 9
Reply by Eric Kjelshus

"This is true, it does happen, but it tends to not last very long as temperatures eve…"

Mark Furst replied Sep 5 to Baffles without soffit vents?

14 Sep 9
Reply by Eric Kjelshus

"In my experience the "best fan" is one that's installed properly.  The trouble with…"

Mark Furst replied Sep 5 to Best Exhaust Fans - your opinion?

3 Sep 12
Reply by Russell Pope

"Hmm, good point. I didn't notice any droppings but it could be. I'll check my other…"

Mark Furst replied May 22 to Using radiant barriers as duct insulation, Aka "Bubble wrap" What value do you assign for R-value?

19 May 22
Reply by Dennis Heidner

"On a tangentially related topic: I saw this today in an old attic installed AC syste…"

Mark Furst replied May 22 to Using radiant barriers as duct insulation, Aka "Bubble wrap" What value do you assign for R-value?

19 May 22
Reply by Dennis Heidner

"After testing many hundreds of homes over the years I find that replacing windows is…"

Mark Furst replied Mar 7 to Are Energy Efficient Windows worth the investment?

24 yesterday
Reply by Luis Rios

"Large multi-families are challenging, both to test and to upgrade. I work solely in…"

Mark Furst replied Feb 25 to 70 unit building rehab

12 Feb 26
Reply by Eric Kjelshus

"Busy days "I have never seen an inside wall that did not leak to the exterior." I ha…"

Mark Furst replied Oct 5, 2018 to How to measure room pressures

20 Oct 5, 2018
Reply by John Proctor

"I use an Alnor flow hood which I know works both inside and out as I recently measur…"

Mark Furst replied Oct 5, 2018 to Bath fan weirdness

13 Oct 11, 2018
Reply by Bruce Fillmore

"Leakage, yes, but to where? The interior? These are only run in interior walls (exte…"

Mark Furst replied Oct 1, 2018 to How to measure room pressures

20 Oct 5, 2018
Reply by John Proctor

RSS

Latest Activity

AJ Afkham replied to AJ Afkham's discussion For Sell DG-700 in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"Hi Dwayn, I sold it already. I need to change the status on this"
2 hours ago
Dwayne M Petko replied to Jimothy Whisnant's discussion 2-Minneapolis Blower Doors w/DG700’s and 2-Ductblasters w/DG700’s $5000 in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"do you still have duct blaster with DG700 available?"
3 hours ago
Dwayne M Petko replied to Alex B's discussion Selling- Energy Auditing Equipment in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"how much are you asking for one DG700"
3 hours ago
Dwayne M Petko replied to William Ballough's discussion Equipment for Sale - Duct Blaster System in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"is the duct blaster equipment still available? "
3 hours ago
Dwayne M Petko replied to AJ Afkham's discussion For Sell DG-700 in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"would you sell for less. the DG700 are out of stock, but new they were selling for $700.  your…"
3 hours ago
Dwayne M Petko replied to Steve Taylor's discussion Selling it all cheap! in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"your post is a little old now, so I am not sure what you still have.   do you still have the…"
3 hours ago
Dwayne M Petko replied to Nolan Walker's discussion Energy Auditing Equipment for Sale - Duct Blaster, Old Blower Doors, CO / Gas detectors, DG-700 in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"I have a friend interested in duct blaster, but I saw someone else was interested also. 1. let me…"
4 hours ago
Luis Rios replied to Tom Smith's discussion Are Energy Efficient Windows worth the investment?
"To really know how much you are going to save it is important to know the current condition of the…"
yesterday
Emily Ambrose posted a blog post
yesterday
Profile IconChris Crawford, Jerry Herron, Baker Electric Home Energy and 1 more joined Home Energy Pros Forum
Friday
Dennis Heidner replied to John Lile's discussion Air Sealing Manufactured Home
"Yup,  I'm not sure you want to even try tightening up a modular home built before…"
Friday

© 2019   Created by Building Performance Association   Powered by

Badges  |  Report an Issue  |  Terms of Service