Bathroom Light CFL to LED Conversion

We converted this bathroom light fitting to use High power LED Bulbs The Fitting already had 2 x CFL bulbs total wattage = 28 Watt We Fitted 2 x LED bulbs to...

Views: 644

Comment

You need to be a member of Home Energy Pros Forum to add comments!

Join Home Energy Pros Forum

Comment by Bob Blanchette on November 3, 2012 at 8:25pm

I couldn't get the sound to work on the video. I didn't see the wattage of the new LED bulbs or the cost of the new bulbs. Has anybody calculated how many hours the fixture has to run for the LED retrofit to pay for itself?

Comment by Dennis McCarthy on May 17, 2012 at 11:05am

The use of LED lighting thru out the house is old news for us- My bathroom has been fitted out with

quality LED lights since 2008. A couple of considerations for those who will be transitioning to 21st

century lighting soon. Color temperature and especially Cri  are somewhat more critical in area where

Aesthetics are concerned  - think make up application. Look for a vetted product that has CRI over 80

 ( btw the appropriate metric - measure

that should be used is the color quality scale CQS - NOT  CRI) but I digress. Its not used much -yet.

Also since bathrooms are unique relative to moisture there is another consideration.

 Buyers should be aware of the IP rating for damp area use ( humidity/ water spray) you may want to

use different products by various mfgs. The luminus flux should be up to current levels, also look to

the better products for dimming capabilities, the output of directional light  could also be an issue.

Additional bear in mind you get what you pay for - the $10 A-19 may be what your what budget likes but

often a lower end product will be using inferior diodes, capacitors and have poor performance over

8-14 years purported lifespan. As to which brand or mfgs are best- another good feature is for the lamp

thats choosen to be interoperable.

 

 While I won't specify or recommend - I'll repeat the axiom for LED lights - do your due diligence and you

will be replacing your lamps once a decade- My whole house is all LED and my home electric bill has

only been above $50 for a family of 4 ----- 3 times in 4 + years its usually $40 ish - you want great results

both photometric and radiometricly speaking - you get the results by making an informed choice !

 

Latest Activity

Dannie Jackson liked Barry NewDelman's discussion Help your Clients save, THEN do what you do best
4 minutes ago
Dannie Jackson replied to Barry NewDelman's discussion Whats the Consensus of this group Define "Energy Efficiency" in the group Energy Efficient Design
"Design wise I would say that energy efficiency is defined by the Btu / square foot.  This is…"
8 minutes ago
Dannie Jackson joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
8 minutes ago
Dannie Jackson liked Chris Laumer-Giddens's group Energy Efficient Design
34 minutes ago
Dannie Jackson posted a blog post
1 hour ago
Dannie Jackson liked Home Performance Coalition's blog post Building a Market for High-Performing Homes
2 hours ago
Summer Reyes posted a blog post
17 hours ago
Oliver Periman is now a member of Home Energy Pros Forum
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service