Window Improvement vs. Window Replacement

Most energy audit reports place windows very low on their list of energy improvement priorities. This isn't surprising because of the relatively high cost of replacement windows coupled with what are commonly marginal improvements in their thermal performance. Since audit reports generally prioritize energy efficiency improvement opportunities according to their cost vs. thermal benefit  (fuel savings) ratio, the energy payback economics of replacement windows are notoriously poor across the entire quality/cost spectrum of replacement windows. This is true because, in order to achieve significant thermal improvement with replacement windows one must invest in the very expensive triple-glazed units fitted with specialty glass and the fuel savings may not be recouped during the useful life of the window. 

While all of the above mentioned cost and performance factors may be true, I believe that the listing of windows as a low priority energy improvement opportunity is fundamentally flawed, often resulting in the audit doing an unintentional disservice to the building owner. This common flaw lies in the mistaken assumption that, aside from repair and weather-sealing, window 'replacement' is the only meaningful window improvement option. I want to encourage auditors to consider the merit of many other more affordable and cost-effective window improvement opportunities.

There is more to window performance than thermal efficiency, but this site is for energy professionals so I will focus most of this blog on thermal performance. Broadly speaking, there are three ways in which windows can be thermally improved: 1) repair and weather-sealing; 2) supplemental panels and window treatments; and, 3) window replacement. As we've all learned in Energy Efficiency 101, one should undertake (or recommend) the no-cost and low-cost improvements first; and, in the case of windows, the most bang-for-the-buck lies in Category 1: repair and weather-sealing. Many energy conscious building owners will have already accomplished this with caulking. Category 2: supplemental panels and window treatments are generally the next most cost-effective category of window improvement measures. These can include:  exterior storm sash, interior thermal shades, heavy curtains, and supplemental insulation panels. Of these options, exterior storms and thermal shades are most commonly found to be already in place, leaving supplemental insulation panels as a commonly overlooked but often quite affordable and highly cost-effective window improvement opportunity.

Obviously, there are those situations that demand window replacement for reasons other than thermal efficiency such as, structural integrity; but, if the existing windows are structurally sound, there are several cost effective ways to improve their performance, operation and appearance without resorting to replacement.

Future posts will address both optical and thermal window performance, as well as the human needs and expectations regarding window use, maintenance, operation and appearance.

Post Script:

After nearly 50 years as an architectural planning and design professional, an HVAC designer, an energy auditor and audit systems designer, a high-performance building consultant, and a residential general contractor, I narrowed my focus and sold high quality replacement windows in Northern New England for a year. This experience awakened me to the market's growing need for more affordable and cost-effective alternatives to window replacment. In response, two years ago I established Window Improvement Masters, LLC located in Orford, NH. www.windowimprovementmasters.com www.rjbacondesign.com

Though my current interests (and this blog) are focused on the role of windows in improving occupant comfort while achieving more efficient building performance; I recognize that all building systems - both static and dynamic, as well as human - must work together to satisfy the myriad needs of the building's owners and its occupants - and these needs go well beyond thermal efficiency and energy economics. I, therefore, welcome a discussion with others who appreciate the need for a holistic approach to addressing these inseparable matters of resource conservation and energy use in the built environment.

Views: 550

Comment

You need to be a member of Home Energy Pros Forum to add comments!

Join Home Energy Pros Forum

Comment by Bob Blanchette on July 14, 2013 at 8:04pm

I once had a house built in the 20's, the windows were the original wood ones, rot and all. I did TV repair at the time and used old screen protectors with weatherstripping as the additional pane. $5 for a roll of weatherstripping paid off is one month.

Comment by Robert D York Jr on July 7, 2013 at 11:01am

When I first started weatherization, back in the early 90's, window repair and weatherstripping was top priority. Auditors would have me rework the entire sash. Schlagel weatherstripping was used, glass replaced, new sash locks installed. Old windows became pretty much new. Talk to people about it in today's "weatherization" circles and they are clueless, or consider it to much work. Pay back on replacement may not get the SIR people are looking for, but, I'd be willing to bet that the old school approach to weatherstripping would. 

Latest Activity

David Butler posted a discussion

Welcome Home Performance Forum Members (formerly RESNET BPI - Energy Audit and Home Performance)

Last month the Home Performance Forum merged with Home Energy Pros, now under the Home Performance…See More
35 minutes ago
Sean Wiens replied to Don Fugler's discussion joining ducts in the group HVAC
"Various studies have indicated very little air flow along surface of duct (for ventilation - have…"
1 hour ago
Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don. We have never considered screws as impeding airflow, but I can see how in some ducts (e.g.…"
2 hours ago
David Butler joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
3 hours ago
David Butler joined James White's group
Thumbnail

Building Simulations

Work collaboratively to find easier, more accurate and better ways to model, predict and verify a…See More
4 hours ago
David Butler joined Mark Richardson's group
Thumbnail

Renewable Energy

This group will focus on the issues associated with incorporating renewable energy sources like…See More
4 hours ago
David Butler joined Kyle Brown's group
Thumbnail

Wrightsoft - Manual J / Manual D

If you use Wrightsoft to calculate loads or design ducts, you likely have questions.  Get answers…See More
4 hours ago
Profile IconDavid Butler and Don Fugler joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
4 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service