Solar Thermal Installations a Highly Efficient Technology Growing in Popularity

In 2008, the solar thermal industry in the United States underwent a period of unprecedented growth. The Great Recession caused the economic situation to worsen in 2009, lowering consumer spending as well as decreasing the demand in the solar thermal industry. Slowly in 2010, the solar thermal industry began to recuperate and experienced an optimistic growth in which solar thermal installations began to increase in popularity. Consumers began realizing that solar thermal installations are a highly efficient technology that greatly improve the return on investment and may increase the value of their property.

A new innovation in the solar thermal industry that caught consumers' attention is the growing trend towards combination solar hot water and home heating systems. These systems are custom-made and require knowledgeable system designers and installers.

Heating and hot water are the largest consumers of energy in a residential home. The combination solar hot water and home heating systems help reduce a home's energy use and reduce costs, but the combination systems are difficult to design and install since each home has a different range of needs. Installers often face challenges integrating equipment into an efficient solar thermal combination system for homes.

"Unfamiliarity with these components or system design increases the time required to build a project and contributes to the overall costs hurting the customer's return on investment and potentially jeopardizing the project completely," said Nigel Rudell, vice president of operations at Apricus Inc., and Eric Skiba, technical engineer at Apricus Inc. Therefore, the solar thermal industry requires a well-trained workforce to take on the challenges of design and installation.

As the solar thermal industry grows, it is important that workers receive on-site solar training in order to make the combination solar hot water and home heating systems efficient. The benefits of being trained at a solar training school outweigh its costs, and creates a workforce that is ready to take on the challenges of solar installation and design. The solar thermal industry requires workers to have attended solar installation courses in order to be considered as having the qualifications needed towards executing the job correctly.

"As demand for these systems increases, a lack of knowledgeable installers could hamper market growth, creating a niche market of installers. Training sessions will help grow a network of competent installers capable of designing and installing these systems, meeting anticipated industry growth," continued Rudell and Skiba. "To help achieve market acceptance, the entire industry must put an emphasis on providing adequate solutions and training so that distributors and their installers have access to materials and products that allow them to design a system with confidence."

It is imperative that the renewable energy workforce of the 21st century has the motivation to receive solar installation certification because combination solar hot water and home heating systems is a difficult task to take on. With the right solar training, efficient systems will be installed quicker and at a lower cost, allowing to achieve the goal of more solar thermal installations on homes.

Views: 117

Tags: certification, course, installation, on-site, school, solar, training

Comment

You need to be a member of Home Energy Pros Forum to add comments!

Join Home Energy Pros Forum

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler 17 minutes ago. 15 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah 3 hours ago. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

David Butler replied to David Butler's discussion How would you insulate this roof?
"Stuart, I wasn't considering the copula windows... yes, those would indeed need to be…"
17 minutes ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"Well, @David Butler, you have seen the property more accurately than I have, but my impression of…"
25 minutes ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"@ Stuart,I don't think there's any concern about impact of 4" build-up on elevation…"
1 hour ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"So this building has a few issues with air leaks and air leaks have so much to do with discomfort…"
1 hour ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"John Hatfield has the right idea here for a new roof deck. Polyiso boards always need a good stout…"
2 hours ago
Keith Tripp replied to Sean Lintow Sr's discussion Water Saver or Gimmick? in the group Best Practices (Residential)
"Interesting to see that recirc. has been in use for many years in some places. It is still a…"
3 hours ago
Mahendra Shah replied to John Krochmalny's discussion Psychrometric Chart Training
"John Thanks for show and tell tutorial"
3 hours ago
Walter Money replied to David Butler's discussion How would you insulate this roof?
"Gentlemen, and ladies, So, as I read this, I see a perfectly good roof that works in serious…"
5 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service