# Mind Set Change

03.20.2012

offthegridUSA

ENERGY AND ARCHITECTURE

Mind Set change

The way we think could be costing us a lot of money.

I’ll to the point in a minute but I remember working in London England on a hotel project in Lisbon, Portugal. Everything had to be done in the Metric system. It took awhile to think in Metric terms  And at that time there were no Euros only Crowns, ½ Crowns, Schillings, Pence and Ha’pence (half a penny) that took a while to get used to.

Most Americans, by birth, think in terms of feet and inches, those who immigrated here had the opposite change of mind set to deal with.

So let me ask you, If I were to tell you that I live in 450 square meter house. What be your first reaction? Pretty small huh! Well that actually converts to over a 4,800 square feet

When we travel abroad we have to think in Kilometers per hour or liters when we gas up the car.

Now to the point. Think Electricity

Your significant other says the bathroom light is out so the men of the house can’t Shave or She can’t put on her makeup, which by the way takes a lot of time and burns up tons of watts.

So you think OK I’ll stop and buy a 100 watt bulb, that will give us enough light.  But asking for a 13 Watt CFL bulb would probably leave you thinking that that would be way too small.

Most everyone I know growing up understood the four basic sizes of light bulbs; 40, 60, 75 and 100 W and it was easy to determine what size wattage light bulb would be applicable to a certain task. For example everyone would realize the 40 Watt light bulb in a ceiling fixture would certainly not give us enough light or putting a 100 watt light bulb in the refrigerator would certainly be too much light and of course create excessive heat.

So here’s the rub, wattage has absolutely nothing to do with the amount of light for the most part. Wattage is simply a measure of electric power You could take a 75 watt or a 100 watt light bulb put it into a black bag or paint the bulb black and turned it on and you would not see the light but you would certainly be using the power and that costs you money.

The proper term for light output is lumens which are a measurement of light for example having a candlelit dinner may give you about 12 lm of light where as a 60 W light bulb would give off about 840 lm.

Next time you go to hardware or a big-box store and buy light bulbs tell the clerk you would like an 800 lumen light bulb and see what kind of reaction you get.

Don’t worry about the Color output, The one thing that I never liked about the florescent light was the bluish color that it gives off but that was a long time ago today most Fluorescent and CFL’s are color corrected for daylight and warmer whites. So in fact you have a little more flexibility on the type of light that you prefer.

 Incandescent CFL LED Approximate Lumen range 40W 9-13   w 5w 450lm 60W 11-15W 7W 800lm 75W 18-23W 9W 1100lm 100W 25-30W 13W 1600lm 150W 30-52W 2600lm

Here’s a chart that shows the difference between incandescent light bulbs and the soon to become standard “CFL or LED” bulbs and the wattage associated with each type.

Lamp- Wattage Comparison

Now, How about some cost comparisons?

Look at your current electric bill and take the total cost will which includes the cost of the energy, the distribution and the. Taxes and divide that by the kWh’s. Depending on where you live that could range anywhere from 0.06 cents a kWh  to 0.12 cents a kWh. Then list the size and type of each bulb and the average number of hours they are in use. Sounds like a lot of work but let’s take a look at simple example for a month

Cost of Electricity is 0.08ct/kWh

Number of light fixtures is 20 (all the same wattage i.e. 75 watts)

They all on for 5 hours a day

20 Bulbs x 30 days x 5 hours per day x 75 watts= 225000 watt hours

Divide by 1000 to get KWh: 225000/1000 = 225 KwH

225kWh x 0.08 cts = \$18.00

Now let’s change to a CFl with the same light output (remember the lumens?

20 Bulbs x 30 days x 5 hours per day x 9 watts= 27000 watt hours

Divide by 1000 to get KWh: 27000/1000 = 27 KwH

27kWh x 0.08 cts = \$2.16

\$18.00 -\$2.16 leaves you 15.84 a month That’s a 88% savings !!

So how many people to take to change a light bulb?  Sound familiar? Two if you are lazy one to go the store and the other to change the bulb.

Lamp Life and Lamp Costs

The typical life expectancy of an Incandescent bulb is approximately 750 hours and costs about  \$0.75

The typical life expectancy of an CFL is approximately 10,000  hours and costs about \$ 5.00

Or  one (1) CFl = 13.33 Incandescent bulbs   ( \$5.00 vs \$10.00)

In the summer of 2007 the federal government and acted the energy independent is to react 2007. The efficiency standards will start with 100 W bulbs and end with 40 W bulbs. The timeline for these standards was to start in January 2012 but on December 16, 2011, the US House of Representatives passed the final 2012 budget legislation, which effectively delayed implementation until October 2012.

So we have a little bit of time left it is certain to happen.

Views: 123

Tags: http://ow.ly/8m3xv

Comment

Join Home Energy Pros Forum

## Forum Discussions

### LED's interfering with Garage Door Openers

Started by Bruce Navin in General Forum. Last reply by Dennis Heidner 6 hours ago.

### Condensation on an interior wall of a detached garage.

Started by Pamela Brown in General Forum. Last reply by Walter Ahlgrim 22 hours ago.

### Worst boiler ever?

Started by Mark Furst in General Forum. Last reply by Mick Lane on Thursday.

### Which is the valid draft test?

Started by Griffin Hagle in BPI. Last reply by Paul Morin on Thursday.

### What kind of experience have folks had using blower doors in multifamily buildings?

Started by Evan Mills in General Forum. Last reply by Paul Morin on Tuesday.

314 members

54 members

136 members

12 members

151 members

## Latest Activity

"I posted an explanation to Liam weeks ago.   Since different LED manufacturers may use…"
6 hours ago
"No one replied! ."
12 hours ago
"Are you willing to ship?"
14 hours ago
Kevin Jacks joined allen p tanner's group

### Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
14 hours ago
"Do not be fooled it is very common problem for cast iron wood working equipment to sweat and rust…"
22 hours ago
"Most all residential buildings are built with a 50-year life cycle. If the building stock in…"
yesterday
Taylor Joseph Mckay and Karin Haerter joined Home Energy Pros Forum
yesterday
"Dave I am selling everything as one package"
yesterday
"What's your price for the DM2?"
yesterday
"There is no one-size-fits all answer...It would be interesting to see some real data on low income…"
Thursday
"For condensation you need one simple condition. A surface below the dew point. There are lots of…"
Thursday
Thursday
Mick Lane replied to Mark Furst's discussion Worst boiler ever?
"Nice.  Probably want to clean the orifices on the burner. That firebox is a little too full of…"
Thursday
Home Energy Magazine's video was featured

### Legends of Home Performance: Sam Rashkin, Chief Architect, Building Technologies Office, U.S. Department of Energy

Home Energy Magazine's series "Legends of Home Performance". "There's reason for us to be excited from environmental, economic, health perspectives, for the ...
Thursday
Diane Chojnowski added 2 discussions to the group News & Announcements
Thursday
Ron Piethe and Ali Alajmi joined Home Energy Pros Forum
Thursday
"I agree that checking for combustion spillage is more important that checking for draft.  It…"
Thursday
"Forget the draft measurement issue,,, just look at that incorrectly applied pipe wrap next to the…"
Wednesday
Home Performance Coalition posted blog posts
Wednesday
Home Performance Coalition's blog post was featured

### Two Ways YOU Can Be A Face of EE

Want to help advance our industry, without spending time on policy advocacy? Here are two simple,…See More
Wednesday