How the Heat Pump is King of Recycling

If You Like Recycling and Efficiency, Get A Heat Pump

by Don Ames, www.detectenergy.com, The Energy Spy Insider weekly Free eNewsletter.

The heat pump maintains its great efficiency by recycling refrigerant over and over again. In fact, the Heat Pump is the king of recycling. If you've seen a new, shiny heat pump lately, you would not imagine that you're looking at one of the most efficient recyclers on the planet.

You thought recycling was about pop cans, cardboard, and glass pickle jars, but let's take a look at heat pump efficiency and a new look at real recycling. Heat pumps ( and refrigerators and air conditioners ) take recycling to a whole new level. The process that makes a heat pump work and makes it so efficient has to do with recycling a compound, known as a refrigerant, and recycling it over and over again. A refrigerant it turns out, is the ultimate cardboard.

I'm sure if you tried to recycle cardboard over and over it would look a little dilapidated after a number of turns through the process. At the least, once cardboard was made into cardboard for the 10th time, the amount of cardboard you had remaining would be far less than what you started with. A heat pump, on the other hand, can recycle a refrigerant for years and end up with the same amount as when it started.

The refrigerant used in heat pumps has changed over the years, for a longtime it was simply called Freon. You older folks can remember the magic of Freon, it was regarded as a miracle fluid. But today, new refrigerants have been developed with names like R-22 and HFC-410A - but, by whatever name, this magical fluid has the ability to be recycled many times over and has the ability to release or capture heat.

heat pump efficiency 

To maintain Heating and Cooling Efficiency, the appliance moves heat from one location to another using the refrigerant. In this process, one location is heated and the other is cooled. The refrigerant is pumped around and around a series of coils and, with the help of a compressor pump and an evaporator, turns itself from a liquid into a gas and then from a gas back into a liquid. It is this conversion from a gas to a liquid that heats and cools a home and makes the heat pump so efficient.

I call that recycling, turn the liquid into a gas and then recycle it back into liquid - once it is a liquid, then recycle it back into a gas. This process of recycling is what makes the heat pump a very efficient heating and cooling unit. It's great, because no fossil fuels are burned and no megawatts of electricity are consumed.

Instead of heating a  home by burning natural gas or propane and then blowing the hot air into the house or using electric resistant strips, blowing air over the red hot strips and then blowing the warmed air into the home, why not use the heat pump efficiency method. With this method, a small electrical powered pump pushes a refrigerant around and around in a copper tube and handles both heating and cooling. It's like recycling, only better.

Heat Pump Efficiency is kind to the environment, often eligible for rebates and incentives, sometimes a recipient of State and Federal tax credits, and simply one of the least expensive ways you can heat and cool your home. And just think, all because a refrigerant likes to be recycled.

Thanks for stopping by Detect Energy, hope you'll come back soon, but I won't leave the light on for you...

Views: 1101

Tags: efficiency, energy, environment, heat, heating, pump, recycling, refrigerant

Comment

You need to be a member of Home Energy Pros Forum to add comments!

Join Home Energy Pros Forum

Comment by Don Ames on December 5, 2011 at 3:41pm

Chris, I agree, heat pump and a solar array, good way to go. Thanks for the comment,  Don Ames

Comment by Christopher Cadwell on December 5, 2011 at 3:15pm

Interesting take on "recycling." Yeah we push for heat pumps on most installs these days. Especially if you can cover the Kwh with a solar array.

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler yesterday. 2 Replies

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco yesterday. 1 Reply

Fixing a water heater?

Started by John Shillito in Best Practices. Last reply by Eric Kjelshus on Friday. 21 Replies

Latest Activity

Profile IconAvery T. Phillips, Sarah Burger, Troy Spindler and 2 more joined Home Energy Pros Forum
9 hours ago
David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"theoretically, let's say you perfectly isolate the HPWH from a heat source. The HPWH's…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Interesting idea. Commercial roof on a slope! Typical density for roofing spray foam is 2.5 to 3.0…"
yesterday
Profile IconRandy Kinnison, Breanna Detwiler, Jeff Farlow and 7 more joined Home Energy Pros Forum
yesterday
Summer Redman added a discussion to the group Job Board
Thumbnail

Hiring 2 Training Specialists in Champaign-Urbana, Illinois

The Applied Research Institute (ARI) at the University of Illinois at Urbana-Champaign is seeking…See More
yesterday
Summer Redman joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
yesterday
Stacie Bagnasco replied to Evan Mills's discussion Dirty solar panels
"This is a great idea. I clicked on your discussion because it made me remember that I forgot to get…"
yesterday
Kirsten Richnavsky posted an event
Thumbnail

rCloud - The Future of Testing at Your Office or Home

October 18, 2017 from 2pm to 3pm
Integrating rCloud as an essential part of your RESNET QA process.Retrotec’s rCloud app is here,…See More
yesterday

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service