Things used to be so easy when working in this business back in the day. When carrying tools for some old timers, I remember some replacing an air filter and kicking the furnace while saying"Yup, still here!" Maintenance these days, for great reason, has taken a more efficient operation mentality, mainly because energy prices have started to affect our wallets. These days, 68% steady state efficiency oil boilers and gas furnaces with high carbon monoxide readings mean something. But, does it necessarily mean we must replace the furnace, boiler, hot water heater, etc.?
I heard a situation a couple weeks ago where a representative of a local gas company, whether or not he was a subcontractor I cannot be sure, completed some maintenance on a gas boiler that he ended up shutting down due to a high CO reading. Most building analysts know that 26-100 ppm CO (in the flue, at steady state) means repair is necessary (see Combustion Safety Test Procedure, BPI.org), and to call a heating professional. So why did this tech shut down and tag this boiler for replacement? Was it actually a sales tactic?
High Carbon monoxide readings tend to point to what I like to call "unbalanced combustion". You see, it could be due to lack of combustion air, too much gas, or too much excess air (not my blog, please keep clicking!). No matter how you slice it, the combustion process is out of balance. I have seen high CO readings for draft inducers failing, secondary heat exchanger condensate drains clogging, improper manifold gas pressure, incorrectly adjusted draft dampers, you get the idea! None of these reasons mean the equipment has to be replaced, but the recommendation could be made.
The boiler I started talking about earlier had a manifold gas pressure twice the recommended value. There was too much combustion air due to a lack of understanding and/or measurement. Since he took the readings, I doubt it was the latter. Looking at the flame on a 90%+ AFUE appliance will never be a justified reason to crank up the manifold gas pressure. If you cannot measure with a combustion analyzer, or even a manometer, at least clock the gas meter before you start creating high CO2 and CO outputs. You are the professional and the homeowner is paying you for the expertise. Please, don't recommend replacing a boiler your company may have installed just a a couple years ago!
http://excessair.blogspot.com/2013/01/high-co-reading-now-what.html...

Views: 8645

Comment

You need to be a member of Home Energy Pros Forum to add comments!

Join Home Energy Pros Forum

Comment by tedkidd on January 10, 2013 at 12:26pm

I can't answer how much of red tag was a sales tactic, but search CO poisoning on google news, or create a news alert and you'll see news reports of deaths and people hospitalized daily.   

Any device disconnected from the flue is dangerous.  That means any natural draft appliance, because they are all disconnected from the chimney they supposedly vent through.  

Here's a great blog by David Richardson on the subject: http://bit.ly/davidrDrafthoods 

Forum Discussions

Psychrometric Chart Training

Started by John Krochmalny in Training 16 hours ago. 0 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler on Monday. 2 Replies

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"Hi Mike, it's good to get some feedback from the field, and thanks for confirming Gen 3 is now…"
5 hours ago
B Eric Bell liked Bob Krell's group Healthy Indoors (IAQ)
13 hours ago
John Krochmalny posted a discussion

Psychrometric Chart Training

Looking through the various areas of this site, I didn't see too much information or training on…See More
16 hours ago
Profile IconMike Malek, Avery T. Phillips and Sarah Burger joined Home Energy Pros Forum
17 hours ago
Dannie Jackson's blog post was featured

Core Heat And Other Concepts

  In some places the use of solar heated liquids from hot water solar panels are used to provide…See More
21 hours ago
Michael Duclos replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"I’ve been looking into Sanden for a multi-family PH near Laconia, NH, ASHRAE 99.6% temp is…"
21 hours ago
Profile IconTroy Spindler, Mike Berg, Andrew McDowell and 4 more joined Home Energy Pros Forum
yesterday
David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"theoretically, let's say you perfectly isolate the HPWH from a heat source. The HPWH's…"
Monday

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service