A fireplace can be a focal point to a room, but how often does the fireplace really get used?   A fireplace can be very drafty and cause you to lose energy and money by taking your heated air up the chimney.  A fireplace is designed to "draft", so that the smoke does not enter the room when you burn a fire.  That draft is always there, even if the damper is closed.  Most of the older fireplace do not have a sufficient or even a working damper to close.  By covering the fireplace, as some people have already done, will stop any heat loss or the entrance of cold air to the home. 

A magnetic, insulated Fireplace Fashion cover, is designed to use on your fireplace when you are not burning a fire.  Energy loss is a big problem with any home that has one or more fireplaces.  Height of the chimney can be a factor with the amount of heat loss, more than one fireplace can cause them to draft back and forth, causing a continuous flow of air coming in and going out of your home.  A Fireplace Fashion cover is an affordable and attractive solution to this problem.

Views: 89

Comment

You need to be a member of Home Energy Pros Forum to add comments!

Join Home Energy Pros Forum

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by Brad Cook 2 hours ago. 27 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco Oct 16. 1 Reply

Latest Activity

Brad Cook replied to David Butler's discussion How would you insulate this roof?
"Bill, you just posted a number of responses in different areas of the thread. I will try to respond…"
2 hours ago
Donald Hester liked Marc Tannenbaum's blog post 3 Issues HVAC contractors Should Know About Impacting Customer Comfort and Health
2 hours ago
Profile IconAlice Quinn and Donald Hester joined Home Energy Pros Forum
2 hours ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"In an earlier response, I noted that we COULD haul drinking water and use the water we collect off…"
3 hours ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"As to the elevations on the cupola – the existing windows up there might survive adding…"
3 hours ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"The purlins are 1 3/4" thick. I believe the top chord of the trusses are 10" deep (but…"
3 hours ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"The cupola windows are the only place there would be a problem if 4" of foam were added above…"
3 hours ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"The purlins are 1 3/4" thick. I don’t know about the fire dangers of PIC or other foams.…"
3 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service