Dealing with the 5 Most Common Furnace and Heating Problems

Most people are reminded of the furnace repair service just when the fall or winter arrives. Whether it’s a residential or a commercial setting, you might have to face a lot of furnace problems in the chilly weather if you have not taken proper care of it until then. This is why you should know about the most common problems so that when these occur, you can manage those efficiently. In case you are wondering why you need to pay a lot of attention to heating repair, there are thousands of reasons. Just think of those chilly winter nights! Without a properly functioning heating or furnace system, you won’t be able to survive through the extreme winter season. Even though it’s advisable to hire an experienced contractor or a reliable local furnace service provider, who will be able to offer the necessary services, you should know a few things about tackling the most common problems. This will not only help you figure out the basic problems as soon as they occur, but also enable you to handle the situations during emergencies.

Here are five of the most common heating and furnace problems that you should know about –

  • Clogged or Dirty Filters – Clogged and dirty filters are one of the most common problems when it comes to furnace and heating repair. These reduce the airflow of the system to a great extent. This makes the circulation process more difficult for the furnace, causing additional pressure on the system. At times, a clogged filter can also damage the limit switch, affecting the working of the fan. This is why you should replace the filters of the system every month in order to improve the efficiency and expand the lifespan of the furnace

  • Problem Due to Lack of Maintenance – You must have invested thousands of your hard earned money to      buy a high-end furnace system. But if it is not maintained regularly, a lot of problems might occur like increase in the energy cost, unexpected breakdowns or poor performance. A regular inspection will help run the system reliably and efficiently.

  • Mechanical Tear and Wear – Just like any other machine, a furnace or heating system too is subject to mechanical tear and wear. These can occur at any point of time and may lead to airflow problems. If not treated timely, these can also cause overheating or heat control related problems. You must remember that the furnace is made of lots of components and if any of the parts stop functioning properly, the entire unit will stop working.                                                                                                                                                                                                                                                                                                                                                   
  • Pilot Control or Ignition Control Problems – Ignition and pilot control are two of the most important components of the furnace unit and if these malfunction, the furnace won’t work properly. As a result, it will make it tough to heat a commercial space or a home. Check out which type of ignition system is there in your furnace. In case it’s a hot surface ignition system, it will use some resistance heating element. On the other hand, if it’s an intermittent pilot system, it will use a high voltage electrical spark in order to ignite the gas pilot..

  • Malfunctioning Thermostat – Thermostat is the device that determines exactly when the heat needs to be produced and in what quantity. In case the thermostat is not working properly, no heat will be produced and the hot air won’t get circulated throughout your home. The intermittent heat that is responsible for ensuring comfort will also cease to exist.

 

These are some of the most common heating and furnace problems. You can avoid all these issues and ensure a properly functioning heating system by ensuring regular maintenance and timely repairs. So, contact a reliable HVAC contractor, get the unit checked thoroughly and ensure timely repair, if any, for its proper maintenance.

Views: 1714

Tags: CO, Contractor, Furnace, HVAC, Heating, Parker, Problems, Repair, and

Comment

You need to be a member of Home Energy Pros Forum to add comments!

Join Home Energy Pros Forum

Latest Activity

David Byrnes's blog post was featured

Strategies for Hiring and Interviewing for Home Performance Professionals

Hire slow and fire fast.  It’s a phrase that experienced managers and human resources professionals…See More
1 hour ago
Diane Chojnowski replied to David Butler's discussion Beginners Guide: Managing Subscriptions on Home Energy Pros
"Thanks for your comprehensive guide, David! There is an RSS feed you can subscribe to at the…"
1 hour ago
Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
17 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
18 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"I never checked that before. Checking now... Section M1502.4.2 of the International Residential…"
19 hours ago
Joseph Frasier is now a member of Home Energy Pros Forum
19 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"Brendan, Thanks for that response. Because of your warning, I just went down to the basement and…"
22 hours ago
Brendan Reid replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don, Summary: DRYER VENT: screws bad idea, possibly prohibited by code. METAL DUCT: must be…"
23 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service