Building Science Proven by the Bug Man


A buddy of mine, Dennis, that’s an exterminator called me the other day while I was standing in Home Depot.  “Jon, I’ve got a problem and I need some of your building science expertise.” The problem he was having was being caused by some granules he had put down to repel some flying squirrels.  The granules create a gas that creates a fairly strong odor.  Unfortunately, this smell was making its way throughout the house.  A couple issues he had already noticed were no gable vents, very few soffit vents, only one short ridge vent, and no turtleback vents.  Needless to say, the attic area is poorly vented.  He felt that because the attic was so poorly vented that the smell had no chance to escape and thus was coming into the house.  Being the nice guy that I am, I offered to come to the house.

The house was 4,500 square feet and it was sunny and about 64 degrees.  Dennis took me through the house and to the rooms upstairs that smelled the strongest (think moth balls).  The worst area was a walk in closet in one of the bedrooms.  The drywall seams were poorly sealed and there was a fluorescent light fixture with large hole for wires behind it (great places for air infiltration). The next place we went to was the attic.  The drop down access stairs had a fairly large gap around the base, which was a bad sign for starters.  Once we got into the attic, you could tell right away that it was warmer than it should have been even though it was sunny that day.  Dennis was correct about the lack of ventilation as well. 

I started looking around and within 10 feet of the entrance to the attic was a panned joist return.  This is where the builder uses the ceiling joists, a couple of cross members, and a piece of duct board to connect a return duct to.  These are NEVER air sealed and in this case, one of the cross members had a knot fall out so there was a hole in it the size of a 50 cent piece.  The insulation around the area was filthy from years of being a filter for the air leakage. There were also several holes from wire accesses and none of the top plates were sealed.  This is all within a few feet of the opening of the attic in a 1,500 square foot attic.

So what was making the whole house smell like moth balls?  First, the gas produced by the granules is heavier than air, so it will fall through the tiniest of cracks as it spreads across the attic floor.  Second, because of the lack of ventilation in the attic, the air is very still, so there is nothing to stir up the gas.  Third, even though it wasn’t really hot that day, the attic was fairly warm because of the sun shining on the dark shingles.  Remembering that the 2nd Law of Thermodynamics states simply that hot goes to cold, the warmer air in the attic was trying to force its way into the cooler home.  Add a bunch of holes and cracks and you have a lot of access to the interior.  Finally, because the ducts were not properly sealed, every time the heater kicked on that morning, the return was pulling the stinky air from the attic into the system, where it was redistributed throughout the upstairs.

Once again, building science proves that even funny smells in your home are merely a symptom of a bigger problem.  I can only imagine what these people’s utility bills were considering this was a 4,500 square foot home.  A simple energy audit performed by a certified professional would easily spot these issues and would give the homeowner a cost effective solution to this problem.  The NRG guy strikes again.

Views: 273

Tags: Air, Efficiency, Energy, Indoor, Quality

Comment

You need to be a member of Home Energy Pros Forum to add comments!

Join Home Energy Pros Forum

Comment by A. Tamasin Sterner on March 4, 2011 at 8:30am
Great story, Jon!  Thank you.  I'm presenting information and case studies like this at ACI, EEBA, and the National Healthy Homes Conference.  Glad to see you've got it and can share it so well!
Comment by David Fay on February 23, 2011 at 10:21pm

I agree with most of your diagnosis but you went a bit off track here: "Remembering that the 2nd Law of Thermodynamics states simply that hot goes to cold, the warmer air in the attic was trying to force its way into the cooler home.  Add a bunch of holes and cracks and you have a lot of access to the interior."

 

Heat moves to cold but hot air doesn't move to cold air. Hot air rises, it doesn't sink. It rises because it is less dense than cold air. You're confusing convection (air moving) with conduction (heat going to cold).

 

David

 

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler yesterday. 15 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah yesterday. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

tedkidd replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"Yeah. Gas water…"
yesterday
Eric Kjelshus replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"With super cheap natural gas prices now, still worth going all electric?  Tankless needs a lot…"
yesterday
Stuart Langley liked Chris Clay's photo
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Stuart, I wasn't considering the copula windows... yes, those would indeed need to be…"
yesterday
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"Well, @David Butler, you have seen the property more accurately than I have, but my impression of…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"@ Stuart,I don't think there's any concern about impact of 4" build-up on elevation…"
yesterday
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"So this building has a few issues with air leaks and air leaks have so much to do with discomfort…"
yesterday
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"John Hatfield has the right idea here for a new roof deck. Polyiso boards always need a good stout…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service