BCAP Gap Analyses a Resource for Midwest States

Energy Code Gap Analyses are reports that document a particular state’s energy code infrastructure to assess current gaps, identify best practices, and give recommendations for how these practices can be improved. The Building Codes Assistance Project (BCAP) has conducted several Gap Analyses over the course of the past year and these analyses can be a major step towards informing the state on how to reduce energy use by improving energy codes in those states. The gap analyses are part of BCAP’s Compliance Planning Assistance (CPA) program.

Thus far in the Midwest, BCAP has conducted gap analyses for the states of Nebraska, Ohio, Illinois, South Dakota, Michigan, Kentucky, and Missouri. Many of these analyses have been requested by departments at the state level and have been used to evaluate the need to move to a more up-to-date energy code. In addition to recommendations, the analyses give the national perspective on energy codes, an overview of the specific state codes, a section on implementation, compliance, and enforcement, and a best practices section, all of which are beneficial in allowing us to see the big picture. In addition to the Midwest, BCAP has also completed gap analyses for Alabama, Arkansas, Colorado, Delaware, Nevada, New Hampshire, New Mexico, South Carolina, Texas, and West Virginia.

One of the most important aspects for success, and coincidentally one of the most common problems being found in virtually all of the analyses of the Midwest states, is the lack of education and training. Generally this is due to a lack of resources available to aide in training. Training should be a top priority in energy conservation through codes because it provides consistency and creates building blocks as codes are implemented in states that do not currently have a statewide code, updated in states that do, and compliance is evaluated in all.

The design and construction community could play a major role in making buildings more efficient and more code compliant, but state and local agencies, energy code advocates, and stakeholder groups can aide these professionals by providing the tools, materials, and training  necessary to make this possible. In some states, such as in Nebraska and Illinois, training is being funded by the state to increase compliance and education credits and certifications are given as incentives for builders, design professionals, inspectors, and state and local officials.

In addition to the necessity of training, the analyses also offer other recommendations. A few of the other recommendations that could be applied to all states, not just the Midwest states or those evaluated, include providing incentives to contractors, community outreach, creation of an enforcement and verification infrastructure, and an automatic review of the energy code. The recommendations outlined in the analyses are a great starting place to reduce energy loads in the states, increase monetary savings by consumers which can help boost the economy, and help the states fulfill their ARRA requirements. The analyses completed by BCAP thus far are a great resource for the states and much like a home energy audit. It conducts an evaluation, identifies areas of possible improvement, then gives suggestions as to how to fix what needs to be improved.

Gap analyses completed by BCAP thus far can be found on their website.

This post was written by Senior Policy Associate Michael Hairston with MEEA. For questions, Michael can be reached at mhairston@mwalliance.org.

Views: 207

Tags: BCAP, codes, energy, training

Comment

You need to be a member of Home Energy Pros Forum to add comments!

Join Home Energy Pros Forum

Latest Activity

Bradford E. White replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"Agreed! True, if an open plan. Simple is best. But away spaces seem to be making a come-back. And…"
55 minutes ago
Kurt Shafer replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"Jerry, as an energy consultant I imagine you are well versed in solar systems. Have you seen how…"
1 hour ago
Scott Mills replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"I have found that ceiling fans are the simplest way to control room stratification "
2 hours ago
Matt Peiris replied to H.O. Electric's discussion Stop Drinking Bottled Water! in the group News & Announcements
"Well water consumers need to test their water every year. Elevated arsenic, nitrate levels or…"
3 hours ago
Kurt Shafer replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"Jerry I don't have videos posted yet but I have some nice pictures from customers. See them…"
3 hours ago
Scott Mills is now a member of Home Energy Pros Forum
3 hours ago
Bradford E. White replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"Qualified "It Depends" kind of answer. 1. Temperature Perception: There is an intangible…"
3 hours ago
John Carton posted a discussion

Insulation touches underside of roof in home with no soffit or soffit venting.

I performed an assessment for a recent home buyer and the home inspector they hired when they…See More
3 hours ago
Jerry Needham replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"Kurt Thanks for the information on the whole house fan and the advise about leaving the fan on all…"
4 hours ago
James White replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"There is more than fan energy to be saved by setting fans to run on "auto". Most forced…"
4 hours ago
Kurt Shafer replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"Jerry, I am a whole house fan expert but not an HVAC expert. However, I have no idea why any HVAC…"
4 hours ago
Jerry Needham replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"Ken This is a great response.  Lots of arguments against leaving the fan on. THANKS"
4 hours ago
Luke Langhals replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"If an E/HRV system is installed in unison with the furnace ducting -- you might consider making the…"
4 hours ago
Ken Summers replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"At Comfort Institute we get asked this question all the time.  The argument for leaving the…"
4 hours ago
Allison A. Bailes III replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"Jerry, as Chris Heenan said below, running the fan continuously will raise the indoor humidity in…"
4 hours ago
Chris Heenan replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"In regions with _high_ humidity, running the fan continuously will be put moisture that the…"
4 hours ago
Barbara Smith replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"Eliminating continuous furnace fan operation is #3 on list of top ways to cut energy use, in this…"
4 hours ago
tedkidd replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"There is no Pat answer. It depends. In a well performing home with proplerly sized equipment and…"
4 hours ago
Barbara Smith replied to Jerry Needham's discussion HVAC Question about running fan continuously Vs. setting on Auto so it runs when AC or Furnace runs
"Many of our Wisconsin residents do not yet have the ECM (electrically commutated motors) though…"
4 hours ago
Diane Chojnowski posted a video

Passive House Explained in 90 Seconds

I'm a Passive House enthusiast. I'm involved in this great movement to create highly energy efficient buildings that use 80 to 90% less energy. But how? Peop...
5 hours ago

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service