Today's homeowner is more concerned with energy efficiency than ever before. A National Association of Home Builders September 2016 survey found that energy-saving appliances were at or near the top of the must-have feature list for 80 percent of new home buyers. In January, the association released the results of another study that revealed homebuyers across all income brackets are increasingly choosing homes with energy-saving elements, as well as other amenities, and will sacrifice square footage to get them.
These same buyers surely want to maximize the efficiency of all the electrical and mechanical systems in their homes, and that includes their HVAC systems. Efficiency, however, is not only a cost-savings issue. It's a comfort issue as well, and one only has to be on the receiving end of frustrated customer telephone calls a few times to realize just how prized a properly functioning climate control system can be.
It's not just older systems that can exhibit substandard performance levels. According to the National Comfort Institute, 50 percent of new systems have efficiency and comfort issues right out of the box. The Energy Star program uses that same figure, also citing that incorrect installs reduce new system functionality by up to 30 percent.
Combine those systems with those that have suffered at the hands of well-meaning DIYers—home insulation projects that damage ductwork, decorative elements blocking thermostats or returns—and one can begin to see the need for qualified technicians who can set things right. One word about qualifications: No HVAC contractor should test and balance before being properly trained to do so.
From my time as a contractor, I’ve heard several common homeowner complaints about ducted systems indicate that the issue could require testing for balanced airflow.
The homeowner notices significant temperature variations from room to room, sometimes even within the same room. This is one of the most common complaints around "unbalanced" systems.
Despite all registers being 100 percent open, the homeowner reports that there is a difference in the strength of airflow from one register to another.
The homeowner has noticed higher humidity in one or two rooms—indicating lack of airflow—and increased dust or "flotsam and jetsam" in another, a sign of too much airflow.
Contractors should take the following steps to test a system for balanced airflow, according to a Contracting Business article by Rob Falke, president of the NCI. This process can also be used to test new systems as well.
It could be that the adjustments made during testing don't resolve the airflow issues. Leaks or damaged ductwork can be the cause of irregular airflow through the system, so a repair or renovation of the ductwork could be in order. If the ductwork that was originally installed with the system can’t handle the airflow, then a total replacement might be in order.
Airflow testing is a great starting point for contractors as it allows them to obtain a clearer picture of the entire system. Additional investigation may be needed.
- Kim Slowey
Kim Slowey is a freelance writer based in Florida. She has a degree in journalism but spent over 25 years in the construction industry and is still a Florida certified general contractor. Kim currently covers commercial and residential construction and real estate for publications such as Construction Dive and Forbes. Kim also writes about energy, HVAC and tools topics for The Home Depot.
This blog originally appeared on www.homeenergy.org.