If you haven't been paying attention, LED's for the home are dropping in price like crazy. 

I first put up a post on the best LED A19 bulb for 60-W and 40-W replacements with pricing pulled from Amazon.

But then Cree came out with their bulb and totally blew the field away.

You can see a comparison I put together at the bottom of this post.  When you factor in price, efficiency, and warranty, no other manufacturer comes close to what Cree is currently offering.

Are LEDs cheaper than CFLs?  Nope, not even close, but they're getting closer.

Plus, they don't contain mercury (no need for special recycling), their lifespan isn't shortened by frequent on/off (like my CFLs in my kitchen are with my occupancy sensor), and they will last much longer than CFLs.

I have 4 LED bulbs in my home, and I still use mainly CFLs, but my thinking has changed recently and I'm taking a much closer look at LED bulbs.  How about you?

Name   Color temp Warranty (Yrs) Lumens Watts Lumens/Watt  Price  Lumens/Watt/Price
                 
Philips AmbientLED 2690 6 805 12.5 64.4  $16.65 3.9
Cree 9.5W 2700 10 800 9.5 84.2  $12.97 6.5
                 
Feit Electric 5000 2 800 13.5 59.3  $16.00 3.7
Cree 9W 5000 10 800 9 88.9  $13.97 6.4
                 
Maxxima LED 2700 3 465 7 66.4  $9.99 6.6
Cree 6W 2700 10 450 6 75.0  $9.97 7.5

Views: 466

Tags: bulb, cfl, comparison, cree, led, vs.

Comment

You need to be a member of Home Energy Pros Forum to add comments!

Join Home Energy Pros Forum

Comment by Chris Kaiser on April 18, 2013 at 4:48pm

David,

That is pretty surprising!  I would expect something like that from a CFL...but not from an LED bulb.  You think they'd figure out how to package something like that.  How did the ones you got that weren't broken work out?

Comment by David Meiland on April 17, 2013 at 5:47pm

Based on a couple of blog posts I read here, I decided to order some of the CREE 9w LED bulbs listed above. I ordered a package of 6 from Home Depot online, since I don't live anywhere near a store. The first shipment was back-ordered a while, and when they arrive, 3 of them where shattered INSIDE their packaging. OK, I thought, an odd occurrence, but let's try again. The replacement order arrived today, and 2 of them are broken. HD has been good about handling the replacements, but this is ridiculous. Probably oughta buy these in the store if you want to try them...

Comment by David Meiland on March 26, 2013 at 10:04am

We are mostly LED now, although we do have a few incandescents lurking here and there, and I have (24) T8s in my shop. Previously we were mostly CFL, but they don't compare to LEDs, not even close. The cost of what I bought a year ago vs. the same stuff today... huge price drop. Oh well, I didn't think they would drop so suddenly.

Comment by Dale Stephens on March 26, 2013 at 9:22am

I replaced 35 incandescent bulbs back in November 2012 and paid an average price of $25.28. Replaced many CFL and so far very satisfied with the results except for two issues: 1.) RF Interference (RFI) with my garage door opener see LED RFI, and 2.) bulb flicker with 4 recessed can lights in the living room on a 3-way dimmer. With other home/energy improvements our energy bill last month was less than $75 USD.

Forum Discussions

Home Energy Pros and #MeToo

Started by Mike Rogers in General Forum 12 hours ago. 0 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler yesterday. 34 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Latest Activity

Blake Shurtz posted a discussion

Replacement for Energy Conservatory Flow-blaster

It's too bad that the flow-blaster is no longer being produced or technically supported. Does…See More
6 hours ago
Profile IconBrian Cizmar, Charles Allen, Charles Buell and 1 more joined Home Energy Pros Forum
9 hours ago
Mike Rogers posted a discussion

Home Energy Pros and #MeToo

If it doesn't seem obvious why a discussion of …See More
12 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Sean Lintow proposed rails and clips (re: first comment in this discussion), but in the context of…"
yesterday
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"I missed where the suggestion for rails came in. The plywood would not need any rails. 4+ inches is…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"I'm a little confused about the necessity and purpose of using support rails if working on…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"If you insulate master bedroom and family room from below, you definitely need more R-value than…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Brad, I was only talking about using EPS between the ridges, if necessary, to conform to bolts.…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service