Why Builders Should Care About Grade I Installation

Quality installation of insulation matters and if builders aren’t getting RESNET Grade I installation with fiberglass batts then they’re getting a HERS-score penalty, says new fact sheet on Grade I installation of batt insulation from NAIMA/Insulation Institute.

The RESNET-developed rating system for batt insulation installation includes descriptions of Grade I, Grade II, and Grade III jobs. Grade I is top-quality work and while building code officials rarely fail an insulation installation job, not meeting Grade I criteria is commonplace. The fact sheet explains that builders take a HERS-score penalty for any installation job that’s not Grade I. The penalty for a Grade III job, versus a Grade I, can range from 1.73 to 6.27 points, depending on the climate zone of the home.

How to Get Grade I

“Getting RESNET Grade I requires technical training and a commitment to a quality management process that builders, HERS raters and insulation contractors must work collaboratively to achieve,” said NAIMA VP Marketing and Communications Jordan Doria. Poor installation can compromise a home’s performance, leading to higher energy bills and increased customer call backs for comfort issues. “Our fact sheet shows builders that achieving Grade I installation doesn’t require a huge amount of extra work, but rather teamwork, training, setting clear expectations and a commitment to quality control and inspection.”

High performance home programs like Energy Star and DOE’s Zero Energy Ready homes require Grade I installation. In addition, many utility incentive programs require Grade I for eligibility. But, often times insulation contractor work crews lack the training to deliver Grade I and they are expected to complete the job as quickly as possible, which can lead to substandard work. To get better quality installs, builders must make Grade I installation a written goal, empower the HERS rater as the guarantor of quality and ensure that the superintendent knows the quality goal so that he can reinforce it with the contractors handling the job.

If Grade I is the goal, following the guidance in the fact sheet will help achieve it in a reliable and repeatable manner. Clear goals, communication and a team mentality are the keys to achieving consistent quality installation.

The fact sheet on recommended practices to achieve repeatable Grade I installations is available on the Insulation Institute website.

 

Stacy Fitzgerald-Redd is the Director of Marketing & Communications for the North American Insulation Manufacturers Association (NAIMA).

This blog originally appeared on www.homeenergy.org.

Views: 346

Comment

You need to be a member of Home Energy Pros Forum to add comments!

Join Home Energy Pros Forum

Forum Discussions

Psychrometric Chart Training

Started by John Krochmalny in Training 1 hour ago. 0 Replies

Too many Heat Pump Water Heaters in a basement?

Started by Brad Cook in General Forum. Last reply by Michael Duclos 7 hours ago. 10 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler on Monday. 2 Replies

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

John Krochmalny posted a discussion

Psychrometric Chart Training

Looking through the various areas of this site, I didn't see too much information or training on…See More
1 hour ago
Profile IconMike Malek, Avery T. Phillips and Sarah Burger joined Home Energy Pros Forum
2 hours ago
Dannie Jackson's blog post was featured

Core Heat And Other Concepts

  In some places the use of solar heated liquids from hot water solar panels are used to provide…See More
7 hours ago
Michael Duclos replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"I’ve been looking into Sanden for a multi-family PH near Laconia, NH, ASHRAE 99.6% temp is…"
7 hours ago
Profile IconTroy Spindler, Mike Berg, Andrew McDowell and 4 more joined Home Energy Pros Forum
yesterday
David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"theoretically, let's say you perfectly isolate the HPWH from a heat source. The HPWH's…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Interesting idea. Commercial roof on a slope! Typical density for roofing spray foam is 2.5 to 3.0…"
Monday
Summer Redman added a discussion to the group Job Board
Thumbnail

Hiring 2 Training Specialists in Champaign-Urbana, Illinois

The Applied Research Institute (ARI) at the University of Illinois at Urbana-Champaign is seeking…See More
Monday

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service