We're Not Paying Enough Attention to Kitchen Ventilation

Exposure to kitchen pollutants is a significant and overlooked health hazard in homes. The home performance industry pays great attention to protecting against exposures to combustion pollutants from water heaters and furnaces, but very little attention to an unvented combustion device that is used nearly every day: the kitchen range. A recent LBNL study looked at the chronic health impacts of exposure to pollutants from cooking burners and determined that the risks are not trivial, especially considering our findings on the prevalence of kitchen ventilation and its use (12).  And the popular media are beginning to take notice (herehere, and here).  

Kitchen ventilation is needed in homes with either electric resistance or gas cooking appliances as both types of burners produce pollutants and because cooking itself creates pollutants, odors, and excess moisture.

The need for kitchen ventilation isn’t on most people’s radar as a health issue. It should be. As we work to create healthy, low-energy homes, we must recognize that “build tight; ventilate right” includes effective kitchen (and bath) ventilation in addition to baseline, “whole-home” mechanical ventilation. Pollutants generated in a leaky home get diluted with infiltrating outdoor air. Pollutants in tight homes stay put. A tight home with ineffective kitchen ventilation and even a moderate amount of cooking is a recipe for bad IAQ and potential health impacts.

Right now, there are four main problems with US residential kitchen ventilation:

  • Many existing homes lack any kitchen ventilation.
  • Homes are being built without kitchen ventilation because it is not required in building codes.
  • Even in homes that have kitchen ventilation, few people routinely use it.
  • Even when they are used, many kitchen ventilation systems are only moderately effective.

These problems are at different scales, and have different causes and potential solutions. But they all need to be addressed together if we want to improve the efficacy of our kitchen ventilation, and to create comfortable low-energy homes that are also healthy.

Building codes and standards, design, education, and marketing, among other approaches, all must play a role in addressing these challenges. But the first step is to recognize them as problems and begin to generate the will to work together to solve them.  

To view the full report, “Addressing Kitchen Contaminants for Healthy, Low-Energy Homes”, click here. Also, look for a more detailed look at the study results in a future Home Energy Magazine issue.

Views: 379

Comment

You need to be a member of Home Energy Pros Forum to add comments!

Join Home Energy Pros Forum

Comment by Chris Stratton on April 7, 2014 at 3:43pm

Graham, great points. I'm a fan of induction. If a full induction range is infeasible, a portable single burner induction cooktop can be an affordable and versatile replacement or complement for a gas or electric resistance range.  

Comment by Graham Irwin on April 3, 2014 at 12:45pm

Good idea to stop burning gas inside, induction cooktops eliminate combustion and deliver far more of the heat to the cookware, an additional benefit during cooling season.

Comment by Chris Stratton on April 2, 2014 at 1:58pm

Bob, I agree. Vented to the outside is a great place to start. Next on the priority list for me would be the noise level.

Comment by Bob Blanchette on March 30, 2014 at 9:54am

The first thing that could be done is get rid of those recirculating range hoods that 90% of new homes use. Require all range hoods to be vented to the OUTSIDE.

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler 12 minutes ago. 15 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah 3 hours ago. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

David Butler replied to David Butler's discussion How would you insulate this roof?
"Stuart, I wasn't considering the copula windows... yes, those would indeed need to be…"
12 minutes ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"Well, @David Butler, you have seen the property more accurately than I have, but my impression of…"
20 minutes ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"@ Stuart,I don't think there's any concern about impact of 4" build-up on elevation…"
1 hour ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"So this building has a few issues with air leaks and air leaks have so much to do with discomfort…"
1 hour ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"John Hatfield has the right idea here for a new roof deck. Polyiso boards always need a good stout…"
2 hours ago
Keith Tripp replied to Sean Lintow Sr's discussion Water Saver or Gimmick? in the group Best Practices (Residential)
"Interesting to see that recirc. has been in use for many years in some places. It is still a…"
3 hours ago
Mahendra Shah replied to John Krochmalny's discussion Psychrometric Chart Training
"John Thanks for show and tell tutorial"
3 hours ago
Walter Money replied to David Butler's discussion How would you insulate this roof?
"Gentlemen, and ladies, So, as I read this, I see a perfectly good roof that works in serious…"
5 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service