David Willson's Blog (7)

Willowside Rd., Day 14

John and Jane Doe's report is basically written. I have a template that I use that has been slowly built and improved over the past projects. It's a fine start but still requires a fair amount of custom writing, since each house has enough unique issues that need to be addressed.  There's report software out there such as Recurve's, EAI, or BizEE, but none have that personal touch that comes from a written report.  So here's some items from the report:





Target Infiltration: 0.25… Continue

Added by David Willson on April 26, 2011 at 11:30pm — 4 Comments

Willowside Rd., Day 10, part 2

OK, I'm back from getting the dimensions of Doe's house, enter all the information into EnergyPro, and do an initial calculation. It looks like the house as it is has a HERS of 147, which means that the model predicts that it will use about one and a half times as much energy as a 'reference home', which is this exact same home if it was built to today's energy code requirements and has by definition a HERS of 100. 147 is not too bad but way above what we want. Let's see if we can get it below… Continue

Added by David Willson on April 25, 2011 at 11:30pm — No Comments

Willowside Rd., Day 10

Well, it's taking a bit longer to get to John Doe's report than I'd expected and I've one molar less than a few days ago and a big hole in my jaw.  But, here we are.



I use EnergyPro because I learned it some years ago and I'm familiar with it. Plus, it's the one that's accepted by EUC (Energy Upgrade California), which I plan on applying for this project. Looking over the audit form, everything looks good. We should be able to easily improve Doe's house enough to get a couple of… Continue

Added by David Willson on April 24, 2011 at 11:30pm — No Comments

Willowside Rd., Day 7

Note: the following is not a comprehensive listing of all the details involved in a full audit.  It's meant to be a general description of the process so please don't think that you can read this and do one yourself.  Your and the homeowners' safety requires a full Building Performance training, at a minimum.

 



John and Jane are delightful. Pretty… Continue

Added by David Willson on April 23, 2011 at 11:30pm — No Comments

Willowside Rd., Day 6

The batteries are charged, camera's in the truck, and the blank forms are in the briefcase.  Two of us will arrive at John Doe's at 8:30 tomorrow - Wednesday - morning.  It should be a brisk and partly cloudy day, enough difference between inside and out to get good, clear IR camera pix.  First a short sit-down with the owner, then quick walk through with the camera, a Worst Case Combustion Zone test (let me know if you want more info on that; I'm may write a post about why it's vitally… Continue

Added by David Willson on April 22, 2011 at 11:30pm — No Comments

Willowside Rd., Day 2

I caught up with John Doe while he was on the way to work this morning, apologized for not getting back to him last night, and checked in about Tuesday of next week, April 12th, for his test-in Audit.  The weather forecast is for a perfect day: cool and clear, which should allow distinctive IR photos of air infiltration pathways during the blower door test.



I stopped in at Harmony Farms, my favorite farm & garden store, on Hwy 116 this afternoon to talk to Ali Ghorbani, who is… Continue

Added by David Willson on April 21, 2011 at 11:46pm — No Comments

Willowside Rd.

I have an idea: I'm going to take the job that just came in today and blog it from beginning to end, Day 1 til Day X, every step of the way. Initial call, initial visit, second visit & audit, 3rd visit & report delivery, on through contract phase, our local PACE program called SCEIP - Sonoma County Energy Independence Program - approval, Energy Upgrade California approval, permitting, doing the work, final…
Continue

Added by David Willson on April 20, 2011 at 12:30pm — No Comments

Forum Discussions

Home Energy Pros and #MeToo

Started by Mike Rogers in General Forum 11 hours ago. 0 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler yesterday. 34 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Latest Activity

Blake Shurtz posted a discussion

Replacement for Energy Conservatory Flow-blaster

It's too bad that the flow-blaster is no longer being produced or technically supported. Does…See More
5 hours ago
Profile IconBrian Cizmar, Charles Allen, Charles Buell and 1 more joined Home Energy Pros Forum
8 hours ago
Mike Rogers posted a discussion

Home Energy Pros and #MeToo

If it doesn't seem obvious why a discussion of …See More
11 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Sean Lintow proposed rails and clips (re: first comment in this discussion), but in the context of…"
yesterday
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"I missed where the suggestion for rails came in. The plywood would not need any rails. 4+ inches is…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"I'm a little confused about the necessity and purpose of using support rails if working on…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"If you insulate master bedroom and family room from below, you definitely need more R-value than…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Brad, I was only talking about using EPS between the ridges, if necessary, to conform to bolts.…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service