David Valley's Blog – December 2010 Archive (2)

Enhancing Your Infrared (Thermal) Imaging Scan

Wouldn't it be nice to have all your sites fully prepared for you before you arrive for an infrared scan? It can be possible if you politely ask your clients to have the home (or job site) prepared for you in order to alleviate any issues during the thermal scan. With the many unprepared infrared scans that I have completed, I have come up with a list in order for you to achieve the maximum benefit of your infrared inspections....

 

• Plan optimal times of day for your infrared…

Continue

Added by David Valley on December 17, 2010 at 11:00am — 2 Comments

Infrared Detects Piping Issues Behind Walls

pipe leaks

The problem faced by most property owners is that any moisture behind the walls, over ceilings, and under the floors are often impossible to detect until the problem is excessive and obviously visible. But, by then it’s too late and all damaged surfaces must now be replaced, along with the pipes that caused the damage. Small supply pipe leaks or waste line seepage's are common sources of water…

Continue

Added by David Valley on December 9, 2010 at 12:00pm — No Comments

Forum Discussions

Home Energy Pros and #MeToo

Started by Mike Rogers in General Forum 9 hours ago. 0 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler yesterday. 34 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Latest Activity

Blake Shurtz posted a discussion

Replacement for Energy Conservatory Flow-blaster

It's too bad that the flow-blaster is no longer being produced or technically supported. Does…See More
3 hours ago
Profile IconBrian Cizmar, Charles Allen, Charles Buell and 1 more joined Home Energy Pros Forum
6 hours ago
Mike Rogers posted a discussion

Home Energy Pros and #MeToo

If it doesn't seem obvious why a discussion of …See More
9 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Sean Lintow proposed rails and clips (re: first comment in this discussion), but in the context of…"
yesterday
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"I missed where the suggestion for rails came in. The plywood would not need any rails. 4+ inches is…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"I'm a little confused about the necessity and purpose of using support rails if working on…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"If you insulate master bedroom and family room from below, you definitely need more R-value than…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Brad, I was only talking about using EPS between the ridges, if necessary, to conform to bolts.…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service