Chris Laumer-Giddens's Blog Posts Tagged 'performance' (11)

Rock Wool Insulation for Floor of High Performance Tiny House

VIDEO: Foundation and Floor Framing for High Performance Tiny House, Florida

In August of 2016, we posted a video describing the design and construction of the foundation and floor framing of our High Performance Tiny…

Continue

Added by Chris Laumer-Giddens on January 12, 2017 at 5:30am — 1 Comment

Raising the BARrier in North Carolina Mountain Home, Air Tight Ceiling

Raising the BARrier in North Carolina Mountain Home, Making it Super Air Tight!

The AIR Barrier at the ceiling plane, that is....

At LG Squared, we have experimented with many ways to design and build a roof assembly for a home. Without question, we have found the ventilated attic to be THE most effective.…

Continue

Added by Chris Laumer-Giddens on September 16, 2016 at 7:30am — 5 Comments

Building with Rocks, Rocks. Check out the Drying Potential

Building with Rocks, Rocks! Check out the Drying Potential.

Check this out! This 24" x 48" x 2" thick piece of rigid stone wool insulation was left out overnight (on purpose) on the High Performance Tiny House project site, to see how it handles a deluge of rain, which we knew was coming. One of the many …

Continue

Added by Chris Laumer-Giddens on July 26, 2016 at 6:30am — No Comments

Insulating a Slab-On-Grade in Hotlanta

Insulating a Slab-On-Grade in Hotlanta

Why in the world are we insulating a slab-on-grade in Hotlanta?

Reason #1: Atlanta is not, I repeat, NOT a cooling dominated climate. Wait...What?!?!?

Yes, it gets plenty hot here in the Summer, but it also gets downright cold. Which is why it's one of the more difficult climates to design and build in. We get both extremes.

I'm not saying we know what cold is, like all y'all do up yonder in them…

Continue

Added by Chris Laumer-Giddens on February 1, 2016 at 7:03am — 9 Comments

Sparky Doubled the Air Leakage in this Home!

Sparky Doubled the Air Leakage in this Home

This is the home.

high-performance-bunglaow

This is the hole that Sparky (electrician) "innocently" made to feed a wire to the light on the front porch of the High Performance Bungalow. I discovered it a day or two after our home performance diagnostics team, Carl Seville and Abe Kruger, of SK…

Continue

Added by Chris Laumer-Giddens on November 24, 2015 at 9:08am — 4 Comments

Building Science is Worthless...

Building Science is Worthless...

Thousands of hours went in this construction detail. When we factor all the time spent by building science engineers, from all over the world,…

Continue

Added by Chris Laumer-Giddens on August 25, 2015 at 6:30am — 1 Comment

Designing A Perfect Residential Wall - Atlanta, Georgia

Atlanta, Georgia has a reputation for getting pretty darn hot, but it can also get pretty dang cold (No snickering from you Northerners, please!). Believe it or not, Atlantans use more energy to heat their homes than they do to cool them. The design temperature set by …

Continue

Added by Chris Laumer-Giddens on March 6, 2013 at 2:30pm — No Comments

14 Design Don’ts for High Performance Homes

There are a lot of ways to design a home. Designing one for high…

Continue

Added by Chris Laumer-Giddens on February 14, 2013 at 10:30am — 8 Comments

Part II: Designing for High Performance, Controlling Heat Flow in Slab-On-Grade

In Part I of this series on designing for high performance, we discussed the control…

Continue

Added by Chris Laumer-Giddens on August 15, 2012 at 6:15am — No Comments

Designing for High Performance: Slab-On-Grade, Part I – Controlling Moisture Flow

We’re just a few weeks away from a computer generated, self-guided interactive virtual tour of the Serenbe Residence near Atlanta, Georgia (Climate Zone 3a). We’re using REVIT software to generate the 3D model, then  …

Continue

Added by Chris Laumer-Giddens on August 13, 2012 at 7:00am — 6 Comments

Latest Activity

Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
7 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
8 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"I never checked that before. Checking now... Section M1502.4.2 of the International Residential…"
8 hours ago
Joseph Frasier is now a member of Home Energy Pros Forum
8 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"Brendan, Thanks for that response. Because of your warning, I just went down to the basement and…"
12 hours ago
Brendan Reid replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don, Summary: DRYER VENT: screws bad idea, possibly prohibited by code. METAL DUCT: must be…"
13 hours ago
Profile IconBrendan Reid and David Butler joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
13 hours ago
Profile IconSean Wiens and David Butler joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
21 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service