Chris Laumer-Giddens's Blog Posts Tagged 'high' (9)

Rock Wool Insulation for Floor of High Performance Tiny House

VIDEO: Foundation and Floor Framing for High Performance Tiny House, Florida

In August of 2016, we posted a video describing the design and construction of the foundation and floor framing of our High Performance Tiny…

Continue

Added by Chris Laumer-Giddens on January 12, 2017 at 5:30am — 1 Comment

Raising the BARrier in North Carolina Mountain Home, Air Tight Ceiling

Raising the BARrier in North Carolina Mountain Home, Making it Super Air Tight!

The AIR Barrier at the ceiling plane, that is....

At LG Squared, we have experimented with many ways to design and build a roof assembly for a home. Without question, we have found the ventilated attic to be THE most effective.…

Continue

Added by Chris Laumer-Giddens on September 16, 2016 at 7:30am — 5 Comments

Building with Rocks, Rocks. Check out the Drying Potential

Building with Rocks, Rocks! Check out the Drying Potential.

Check this out! This 24" x 48" x 2" thick piece of rigid stone wool insulation was left out overnight (on purpose) on the High Performance Tiny House project site, to see how it handles a deluge of rain, which we knew was coming. One of the many …

Continue

Added by Chris Laumer-Giddens on July 26, 2016 at 6:30am — No Comments

Insulating a Slab-On-Grade in Hotlanta

Insulating a Slab-On-Grade in Hotlanta

Why in the world are we insulating a slab-on-grade in Hotlanta?

Reason #1: Atlanta is not, I repeat, NOT a cooling dominated climate. Wait...What?!?!?

Yes, it gets plenty hot here in the Summer, but it also gets downright cold. Which is why it's one of the more difficult climates to design and build in. We get both extremes.

I'm not saying we know what cold is, like all y'all do up yonder in them…

Continue

Added by Chris Laumer-Giddens on February 1, 2016 at 7:03am — 10 Comments

Sparky Doubled the Air Leakage in this Home!

Sparky Doubled the Air Leakage in this Home

This is the home.

high-performance-bunglaow

This is the hole that Sparky (electrician) "innocently" made to feed a wire to the light on the front porch of the High Performance Bungalow. I discovered it a day or two after our home performance diagnostics team, Carl Seville and Abe Kruger, of SK…

Continue

Added by Chris Laumer-Giddens on November 24, 2015 at 9:08am — 4 Comments

Designing A Perfect Residential Wall - Atlanta, Georgia

Atlanta, Georgia has a reputation for getting pretty darn hot, but it can also get pretty dang cold (No snickering from you Northerners, please!). Believe it or not, Atlantans use more energy to heat their homes than they do to cool them. The design temperature set by …

Continue

Added by Chris Laumer-Giddens on March 6, 2013 at 2:30pm — No Comments

14 Design Don’ts for High Performance Homes

There are a lot of ways to design a home. Designing one for high…

Continue

Added by Chris Laumer-Giddens on February 14, 2013 at 10:30am — 8 Comments

Part II: Designing for High Performance, Controlling Heat Flow in Slab-On-Grade

In Part I of this series on designing for high performance, we discussed the control…

Continue

Added by Chris Laumer-Giddens on August 15, 2012 at 6:15am — No Comments

Designing for High Performance: Slab-On-Grade, Part I – Controlling Moisture Flow

We’re just a few weeks away from a computer generated, self-guided interactive virtual tour of the Serenbe Residence near Atlanta, Georgia (Climate Zone 3a). We’re using REVIT software to generate the 3D model, then  …

Continue

Added by Chris Laumer-Giddens on August 13, 2012 at 7:00am — 6 Comments

Forum Discussions

Mini split installation location

Started by Jan Green in HVAC. Last reply by Jan Green 5 hours ago. 12 Replies

Think of the house as a really big duct

Started by Frank Spevak in HVAC. Last reply by John White on Friday. 2 Replies

Mini split air conditioners and ceiling fans

Started by Beverly Lerch in General Forum. Last reply by Beverly Lerch on Thursday. 13 Replies

Condensation on ceiling and walls of master bedroom

Started by Jerry Needham in General Forum. Last reply by John Nicholas on Thursday. 10 Replies

Latest Activity

Profile IconShine Facility Services and Todd Hensel joined Home Energy Pros Forum
45 minutes ago
Jim Gunshinan posted a blog post

More "Buzz" from ACEEE Summer Study—Grow Homes

Joe Clark and Martha Wudka of Evergreen Economics did a study in which "getting into the weeds (or…See More
3 hours ago
Jan Green replied to Jan Green's discussion Mini split installation location
"I agre that the south wall would be shaded for the warmer summer months, but it won't look…"
5 hours ago
Jan Green replied to Jan Green's discussion Mini split installation location
"I'll check on electrical.  Good point.  "
5 hours ago
Jan Green replied to Jan Green's discussion Mini split installation location
"Thank you for that.  I wanted to put it on the west wall since there isn't much chance of…"
5 hours ago
David Butler replied to Jan Green's discussion Mini split installation location
"Hi Jan, actually, I said you'd be find putting it on the west wall since you wanted a larger…"
6 hours ago
Brett Little posted an event
Thumbnail

Using Pearl Certification to Bridge the gap between home energy and value - Free CE Webinar at Webinar Online

October 3, 2018 from 12pm to 1:15pm
In this webinar, “The Power of the Pearl Connection”, Pearl Certification’s Cynthia Adams, CEO and…See More
8 hours ago
Walter Ahlgrim replied to Jan Green's discussion Mini split installation location
"Being a Flip you must consider the install cost. At least get a bid for a PTAC unit like the ones…"
9 hours ago
Daniel Baur-McGuire replied to Jan Green's discussion Mini split installation location
"South Wall. It will have the highest load needed for cooling/heating. the shade from the tree could…"
10 hours ago
Glen Gallo replied to Jan Green's discussion Mini split installation location
"I would add where is the power coming from? the south wall proposed might have easier access for…"
10 hours ago
John White replied to John Carton's discussion Insulation touches underside of roof in home with no soffit or soffit venting.
"Soffit vents can be used for intake, but they are not the only means of intake. If you have a…"
17 hours ago
Franco Oyuela commented on David Byrnes's video
Thumbnail

Why One Room Is Hotter Than Others

"If the temperature difference between your bedroom and your living room feels like walking from a…"
Friday
Franco Oyuela replied to Jan Green's discussion Mini split installation location
"First: Mini split are a great option. Second:vI agree with David that installing on the south…"
Friday
Pearl Home Certification's blog post was featured
Friday
John White replied to Frank Spevak's discussion Think of the house as a really big duct
"Thanks for sharing this helpful information. Want to read more on duct cleaning pros and cons.…"
Friday
Jan Green replied to Jan Green's discussion Mini split installation location
"Thank you, thank you!  I appreciate your insights.  I agree with the idea that installing…"
Thursday
David Butler replied to Jan Green's discussion Mini split installation location
"Hi Jan, in a room like that with a relatively balanced aspect ratio, flat ceiling and not much…"
Thursday
Rick Blair joined Kyle Brown's group
Thumbnail

Wrightsoft - Manual J / Manual D

If you use Wrightsoft to calculate loads or design ducts, you likely have questions.  Get answers…See More
Thursday
Jan Green replied to Jan Green's discussion Mini split installation location
"This is a very rough diagram of the detached casita.  There are currently no windows in this…"
Thursday
Sean Wiens liked Jerry Needham's discussion Condensation on ceiling and walls of master bedroom
Thursday

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service