All Blog Posts Tagged 'Repair' (5)

Do you know your boiler is about to Blowdown! Save it!

As winters knock on the doors, the use of boilers is stretched to its extreme limit, ensuring proper warmth in the house. Thus, it is imperative that the boiler is repaired and maintained on a regular basis. This will ensure that when the winter season is at its peak, the boiler works in the perfect condition and there is no breaking down instances. This will help the residents of a house to be prepared to face harsh winters. Moreover, proper maintenance will ensure appropriate fuel bills.…

Continue

Added by SmithWatson on August 5, 2015 at 5:30am — No Comments

Dealing with the 5 Most Common Furnace and Heating Problems

Most people are reminded of the furnace repair service just when the fall or winter arrives. Whether it’s a residential or a commercial setting, you might have to face a lot of furnace problems in the chilly weather if you have not taken proper care of it until then. This is why you should know about the most common problems so that when these occur, you can manage those efficiently. In case you are wondering why you need to pay a lot of attention to heating repair, there are thousands of…

Continue

Added by SmithWatson on July 7, 2015 at 3:30am — No Comments

Getting Your Home Ready For Winter

Keeping your home in the perfect condition during winter is a tough task, but if you can plan it early, it might not seem that tough. Heating repair and boiler repair are some of the most crucial tasks that you have to take care of, since these are what would help you battle the freezing temperature and extreme weather conditions. If you are not quite sure exactly how you can make your home ready for the winter, here are some steps to follow –

  1. Service…
Continue

Added by SmithWatson on June 18, 2015 at 2:41am — No Comments

The Great Water Heater Temperature Setting Debate

Much has been discussed over exactly what is an optimal water heater temperature level setting. Many sources, consisting of ENERGY STAR, offer the energy conserving elements of temperature levels of 120 degrees or lower. And yes, there are cost savings to be had, however realistically for those whose current setting is closer to the standard factory preset temperature of 140 degrees.…

Continue

Added by Phil Luther on February 27, 2014 at 3:00pm — 2 Comments

Water Heater Maintenance in 10 Minutes

I just put together a new infographic on the best two maintenance tasks homeowners can do with their water heaters.  The best part is that they only take about ten minutes or so to perform!  By checking these two things at least once a year will help with getting the full life out of ones water heater, as well as making it as energy efficient as possible.

Enjoy!

10 Minute Water Heater Maintenance

Explore more…
Continue

Added by Phil Luther on February 25, 2014 at 1:54pm — No Comments

Monthly Archives

2017

2016

2015

2014

2013

2012

2011

2010

1999

Latest Activity

Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
3 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
4 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"I never checked that before. Checking now... Section M1502.4.2 of the International Residential…"
5 hours ago
Joseph Frasier is now a member of Home Energy Pros Forum
5 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"Brendan, Thanks for that response. Because of your warning, I just went down to the basement and…"
8 hours ago
Brendan Reid replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don, Summary: DRYER VENT: screws bad idea, possibly prohibited by code. METAL DUCT: must be…"
9 hours ago
Profile IconBrendan Reid and David Butler joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
9 hours ago
Profile IconSean Wiens and David Butler joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
17 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service