ConfusedThermostat

Do you think that the HVAC Guy knew that this was not the optimal location for this thermostat? If we could only get everyone in our industries to do the right thing! Right Lee?

Views: 205

Comment

You need to be a member of Home Energy Pros Forum to add comments!

Join Home Energy Pros Forum

Comment by Guy DuBois on January 17, 2012 at 7:54pm

It is a return and yes, I too believe that the problem is the cold air in the wall cavity that the T-stat is mounted to. This is a kneewall. I've heard some say that a T-stat in proximity to a return = bad. Seems to me that as you pointed out, the problem is with outdoor air migration into any cavity on which the stat may be mounted.

Comment by Evan Mills on December 9, 2011 at 12:51pm

Help us understand a little more about what's implied by this photo.

Are we looking at a supply grill with cold air coming up the plenum behind the tstat, or are we looking at a return with some sort of cold air leakage into the return?  Judging by the warm grille surface, I'm assuming it's a return.  If so, isn't the problem more about the entry of cold air into the wall cavity (and influencing the tstat) than it is about the tstat location per se?

Either way, tstat surface seems to be at a similar temp as the rest of the room surfaces, but of course quite cold on/in the wall it's mounted to.  What's do we know about the resulting temperature where its sensor is?

Comment by Chris Heenan on December 1, 2011 at 7:37pm

shame shame. 

Latest Activity

Dannie Jackson liked Allison A. Bailes III's group HVAC
12 hours ago
Dannie Jackson added a discussion to the group Energy Efficient Design
12 hours ago
Dannie Jackson liked Barry NewDelman's discussion Help your Clients save, THEN do what you do best
13 hours ago
Dannie Jackson replied to Barry NewDelman's discussion Whats the Consensus of this group Define "Energy Efficiency" in the group Energy Efficient Design
"Design wise I would say that energy efficiency is defined by the Btu / square foot.  This is…"
13 hours ago
Dannie Jackson joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
13 hours ago
Dannie Jackson liked Chris Laumer-Giddens's group Energy Efficient Design
14 hours ago
Dannie Jackson posted a blog post
15 hours ago
Dannie Jackson liked Home Performance Coalition's blog post Building a Market for High-Performing Homes
15 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service