Coating asphalt shingles

Views: 151

Comment

You need to be a member of Home Energy Pros Forum to add comments!

Join Home Energy Pros Forum

Comment by Debra Monte on September 14, 2011 at 3:06pm
Thank you.
Comment by Hal Skinner on September 14, 2011 at 2:57pm

Cerama-Tech is good for any climate, cold or hot.  One of the big reasons there are 'Temperature zones' when it comes to these Cool Roof products is ecause of bonding problems.  I have seen sheets of white ceramic roof coatings slide off steeped slope metal roofs into the yard.  Why?  Because the temperature got down to 20 degrees and it lost ability to retain it's bonding.  That is also one of the reasons for rating them for low and / or steep sloped roofs.

 

Cerama-Tech is an exclusive product only available through our exclusive distributors.  Their are distribution areas open in almost every state.  You can contact me for more info on that. 

www.cr-texas.com

Comment by Debra Monte on September 14, 2011 at 1:15pm

Thank you so much Hal, for replying quickly and for the helpful info.  Can this product be purchased and applied by anyone?  Is is also good for other climates, temperate ones like the northeast?  Thanks again.

Deb

Comment by Hal Skinner on September 14, 2011 at 12:49pm

Hi Debra.  It's called Cerama-Tech.  Energy Star 'Cool Roof' coating that can also be used as an interior or exterior paint.  It can be used on every type of roof except eood shingles.

 

On composition or asphalt shingles and rolled roofing, it is applied in one coat at a spread rate of 50 sq ft per gallon.  In the case of very old and dry shingles that rate can drop as low as 35 sq ft per gallon as they can suck it up like a sponge.

 

Cerama-Tech penetrates into the shingles past the granules and into the first layer of felt, it becomes part of the shingles.  It carries a 15-year warranty but we have had it on the roofs od casinos in Nevada for 25-years.

 

Alot of information on our wensite at www.ct-texas.com

Comment by Debra Monte on September 14, 2011 at 9:52am
What product are you using on the shingles.  Can you tell me about the product, thank you.

Forum Discussions

Blower door test for small apartment building

Started by Jerry Needham in General Forum. Last reply by John White on Friday. 9 Replies

ENERGY STAR Version 3

Started by Allison A. Bailes III in General Forum. Last reply by Franco Oyuela on Thursday. 9 Replies

Radiant Barrier Southeast

Started by Gary Wright in Best Practices. Last reply by yassin chahdi on Thursday. 6 Replies

Latest Activity

Brett Little posted a discussion

How to become a Certified GreenHome Professional - Free Webinar!

The Certified GreenHome Professional (CGHP) training is a way to learn about the basics of…See More
15 hours ago
Corbett Lunsford's video was featured

Testing Air Quality with Your Nose: Control Your HOMEChem

Charlie Weschler sits down with Grace and Corbett and gives fascinating examples of the complexity of indoor air chemistry. He is an air quality legend, a professor on three continents, and a super nice guy.
Friday
Profile Iconwallace van, Tony kroos and Sunmar Construction, Inc joined Home Energy Pros Forum
Friday
John White replied to Jerry Needham's discussion Blower door test for small apartment building
"Well, I think it completely depends on the purpose and requirement of the test. Testing one unit in…"
Friday
John Nicholas replied to Jerry Needham's discussion Blower door test for small apartment building
"I can use my Duct Blaster on any house that I expect to be less than 1300 CFM through the…"
Friday
Sean Lintow Sr replied to Jerry Needham's discussion Blower door test for small apartment building
"FYI, he is in Illinois where code is 5 (well up until March as noted when it drops to 4)  Heh…"
Friday
John Nicholas replied to Jerry Needham's discussion Blower door test for small apartment building
"Here are two pictures of the duct blaster fan as a blower door.  1 in a door and 1 in a…"
Thursday
John Nicholas replied to Jerry Needham's discussion Blower door test for small apartment building
"What standard are you testing to? Energy Star requires 5 ACH @ 50.   Code is 3.0 etc…"
Thursday
John Nicholas replied to Jerry Needham's discussion Blower door test for small apartment building
"What standard are you testing to? Energy Star requires 5 ACH @ 50.   Code is 3.0 etc…"
Thursday
Franco Oyuela replied to Allison A. Bailes III's discussion ENERGY STAR Version 3
"The ENERGY STARnew homes program has been around since the mid-1990s and is currently undergoing…"
Thursday
Blake Reid commented on Blake Reid's blog post Managing Mold & Humidity (in Hawaii)
"Thank you very much! They're actually the same, though - the one with the dehu cover photo has…"
Thursday
John Proctor commented on Blake Reid's blog post Managing Mold & Humidity (in Hawaii)
"Nice post -- much better than the one that only showed the dehumidifier."
Thursday
Brett Little updated an event
Thumbnail

Full Circle Urban Forestry: Introducing Urban Wood Opportunities - Free CE Webinar at Webinar Online

December 5, 2018 from 12pm to 1:15pm
Many common urban tree removal practices in the United States view felled urban trees as costly…See More
Thursday
Brett Little replied to Brett Little's discussion Virtual CEU Tour of the Pembroke Passive Solar Zero Energy Ready Home
"You know utilities are pretty complex, especially in IL, however it looks like just about 6.8 cents…"
Thursday
yassin chahdi replied to Gary Wright's discussion Radiant Barrier Southeast
"It’s hard to choose on of these as most of the time the reviews and buying guides found on…"
Thursday
Bruce Fillmore replied to Mark Furst's discussion Bath fan weirdness
"In my opinion venting into any soffit is a bad idea, it usually requires a sharp bend to get into…"
Thursday
Tray Biasiolli replied to Mark Furst's discussion Bath fan weirdness
"I'd agree with Sean - we get wind effects regularly when measuring ventilation fan intake at…"
Thursday
Charles Buell replied to Mark Furst's discussion Bath fan weirdness
"You would have to test the vent at the inside at a location the same diameter as the outside…"
Thursday
Blake Reid's blog post was featured

Managing Mold & Humidity (in Hawaii)

A blower door measures how tight a house isAir sealing done as part of the install, and after…See More
Thursday
John White replied to Cameron Home Insulation's discussion Why is Air Sealing Important?
"Most attics have insulation which helps reduce heat loss. But it won't stop the air flow.…"
Wednesday

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service