Foundation Thermal Sketch

This is here to point out the total lack of recognition of heat-transfer, we just patch up the problem with some insulation here, some vapor barrier there.

Views: 88

Comment

You need to be a member of Home Energy Pros Forum to add comments!

Join Home Energy Pros Forum

Comment by Tom Mallard on March 28, 2011 at 11:02am

The foundation is hard to control for heat-transfer due the compression loads, can't say I've solved anything other than to ponder insulation that can handle the loads to replace the board joists are usually nailed that's anchored to the concrete. That would be a worthy new product for energy conservation in home construction.

Another I've thought of tho' is where joists are open to the interior floor, that first foot needs to breathe but my opinion needs to be stuffed with insulation with the paper torn off to allow breathing of condensation but killing direct air movement.

That area is like a chiller in winter, the cold air from the wood gets warmed enough right there to rise and creep along the floor above the typical insulation just from sag between it and the wood!!

Comment by Tom Mallard on March 28, 2011 at 9:03am
Too true ... I'm such a misfit ...
Comment by Jim Peck on March 28, 2011 at 6:50am
As specie whom claims such intelligence, we do seem remarkably shortsighted

Latest Activity

Dannie Jackson liked Allison A. Bailes III's group HVAC
20 hours ago
Dannie Jackson added a discussion to the group Energy Efficient Design
20 hours ago
Dannie Jackson liked Barry NewDelman's discussion Help your Clients save, THEN do what you do best
21 hours ago
Dannie Jackson replied to Barry NewDelman's discussion Whats the Consensus of this group Define "Energy Efficiency" in the group Energy Efficient Design
"Design wise I would say that energy efficiency is defined by the Btu / square foot.  This is…"
21 hours ago
Dannie Jackson joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
21 hours ago
Dannie Jackson liked Chris Laumer-Giddens's group Energy Efficient Design
21 hours ago
Dannie Jackson posted a blog post
22 hours ago
Dannie Jackson liked Home Performance Coalition's blog post Building a Market for High-Performing Homes
23 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service