This is here to point out the total lack of recognition of heat-transfer, we just patch up the problem with some insulation here, some vapor barrier there.
Tags: Architecture, Autonomous, foundation, heat-loss
Albums: Autonomous Architecture
Location: Seattle, WA
Join Home Energy Pros Forum
The foundation is hard to control for heat-transfer due the compression loads, can't say I've solved anything other than to ponder insulation that can handle the loads to replace the board joists are usually nailed that's anchored to the concrete. That would be a worthy new product for energy conservation in home construction.
Another I've thought of tho' is where joists are open to the interior floor, that first foot needs to breathe but my opinion needs to be stuffed with insulation with the paper torn off to allow breathing of condensation but killing direct air movement.
That area is like a chiller in winter, the cold air from the wood gets warmed enough right there to rise and creep along the floor above the typical insulation just from sag between it and the wood!!
Welcome toHome Energy Pros Forum
Sign Upor Sign In
Or sign in with:
Started by Brendan Reid in General Forum. Last reply by David Butler 3 hours ago.
Started by Eric Kjelshus in General Forum. Last reply by Eric Kjelshus on Tuesday.
Started by David Butler in General Forum. Last reply by Dave Taylor Nov 11.
Started by Dav Camras in HVAC. Last reply by Dav Camras Nov 10.
Started by Brett in HVAC. Last reply by David Butler Nov 9.
© 2017 Created by Home Performance Coalition (HPC)
Report an Issue |
Terms of Service
Please check your browser settings or contact your system administrator.