Attention Wrightsoft Users!

  Have you ever completed a load calculation and it just seems like it was short of what you had expected?  Particularly when you are first starting out with a tool, contractors can make mistakes. After all, we tend to learn "the hard way", right?  In an effort to make software work, the companies tend to start with some default values that require adjustment.  For instance, most have the duct system in the conditioned space calculating zero gains or losses.  If the ducts were in the attic, this could be as much as a one ton load that is missed! Internal gains tend to start at zero, and the foreground for windows is something between crushed rock and green grass.  Most contractors find these values, over time and as they gain experience with the program.  One still overlooked setting in Wrightsoft, a feature that no other ACCA approved software employs, is the Rate Swing Multiplier (RSM).  This can cause you to lose as much as 11% of your sensible gains in an otherwise perfect load calculation, maybe more!

Read More

Views: 218

Replies to This Discussion

YES running loads is like rounding up kats.  You very big knobs like south windows, open return in attics, unsealed supply's of building,   I was at a new home 2 yr old  this week - she claims the 1560 sf 4 spit  75,000 BTU/hr 2.5 ton AC is not big to H/C home.  So I just ran a load and come up with 2/3 of that  but when I ran the blower door  a big -50 PA was 3020 CFM  this home did not get sealed between walls where the plumbing comes up.  The HVAC sheet steel installer got the wrap but I feel the low end builder got what he paid for.   Then HVAC contractor  just put in  a 3 ton and 100,000 BTU and now will bid just this over sized "system".

My point is You must test out.     I have used  Wrightsoft for 20+ yr  and I feel it over sizes 10-25% If you do not test out and redo the numbers.   One of my .goals is to beat the 1st load.   To test is find run time when the temp outside is at design temp - I look for 100%  run time with out the heater hitting high limit.    Gramps told me to size to -40  and I use now 0'.    Now you see that  systems get over sized 

RSS

Discussion Forum

Can you trust your Load Calc Software?

Started by Christopher Morin. Last reply by Eric Kjelshus Feb 18, 2014. 1 Reply

Attic insulation vs. Insulated roof deck

Started by Robert DV. Last reply by Robert DV Jul 6, 2012. 3 Replies

Support licensing in 2011

Started by Robert Zockoff. Last reply by Robert Zockoff Jun 20, 2011. 2 Replies

Latest Activity

Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"Brendan, Thanks for that response. Because of your warning, I just went down to the basement and…"
1 hour ago
Brendan Reid replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don, Summary: DRYER VENT: screws bad idea, possibly prohibited by code. METAL DUCT: must be…"
1 hour ago
Profile IconBrendan Reid and David Butler joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
1 hour ago
Profile IconSean Wiens and David Butler joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
9 hours ago
Profile IconSean Wiens and David Butler joined Mark Richardson's group
Thumbnail

Renewable Energy

This group will focus on the issues associated with incorporating renewable energy sources like…See More
9 hours ago
Al Tibbs posted photos
10 hours ago
Al Tibbs replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"In any case where there is visible mold present, I would begin with a thorough VISUAL assessment of…"
10 hours ago
Al Tibbs joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
11 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service