Attention Wrightsoft Users!

  Have you ever completed a load calculation and it just seems like it was short of what you had expected?  Particularly when you are first starting out with a tool, contractors can make mistakes. After all, we tend to learn "the hard way", right?  In an effort to make software work, the companies tend to start with some default values that require adjustment.  For instance, most have the duct system in the conditioned space calculating zero gains or losses.  If the ducts were in the attic, this could be as much as a one ton load that is missed! Internal gains tend to start at zero, and the foreground for windows is something between crushed rock and green grass.  Most contractors find these values, over time and as they gain experience with the program.  One still overlooked setting in Wrightsoft, a feature that no other ACCA approved software employs, is the Rate Swing Multiplier (RSM).  This can cause you to lose as much as 11% of your sensible gains in an otherwise perfect load calculation, maybe more!

Read More

Views: 218

Replies to This Discussion

YES running loads is like rounding up kats.  You very big knobs like south windows, open return in attics, unsealed supply's of building,   I was at a new home 2 yr old  this week - she claims the 1560 sf 4 spit  75,000 BTU/hr 2.5 ton AC is not big to H/C home.  So I just ran a load and come up with 2/3 of that  but when I ran the blower door  a big -50 PA was 3020 CFM  this home did not get sealed between walls where the plumbing comes up.  The HVAC sheet steel installer got the wrap but I feel the low end builder got what he paid for.   Then HVAC contractor  just put in  a 3 ton and 100,000 BTU and now will bid just this over sized "system".

My point is You must test out.     I have used  Wrightsoft for 20+ yr  and I feel it over sizes 10-25% If you do not test out and redo the numbers.   One of my .goals is to beat the 1st load.   To test is find run time when the temp outside is at design temp - I look for 100%  run time with out the heater hitting high limit.    Gramps told me to size to -40  and I use now 0'.    Now you see that  systems get over sized 

RSS

Discussion Forum

Can you trust your Load Calc Software?

Started by Christopher Morin. Last reply by Eric Kjelshus Feb 18, 2014. 1 Reply

Attic insulation vs. Insulated roof deck

Started by Robert DV. Last reply by Robert DV Jul 6, 2012. 3 Replies

Support licensing in 2011

Started by Robert Zockoff. Last reply by Robert Zockoff Jun 20, 2011. 2 Replies

Latest Activity

Jonathan Beers posted a discussion

MGE hiring for my job

I'm retiring next spring, and MGE is hiring:…See More
10 hours ago
Summer Reyes's blog post was featured

Equipment We Use: Detecting Water With Infrared Cameras

You know water is somewhere on the property, you can smell the mildew, but can't determine the…See More
11 hours ago
Profile IconGlenn Hourahan and Joseph Frasier joined Home Energy Pros Forum
11 hours ago
Alfredo Baccari added a discussion to the group Job Board
Thumbnail

HERS or/and BPI Energy Inspector in SF Bay Area (SAN JOSE, CA).

ELEM3NTS is a leading energy efficient consulting company specializing in residential homes. We…See More
13 hours ago
Alfredo Baccari joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
13 hours ago
David Byrnes's blog post was featured

Strategies for Hiring and Interviewing for Home Performance Professionals

Hire slow and fire fast.  It’s a phrase that experienced managers and human resources professionals…See More
16 hours ago
Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
yesterday
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service