Greetings everyone, 

    I was told that I could get very basic heating loss calculations from TREAT. Besides the amount of fuel usage I cannot find where this basic heating calculation is in TREAT which I am certain it is staring at me right at the face! Could anyone be kind and point it out to me?

Thanks, 

    Luis

Views: 137

Replies to This Discussion

Luis, 

Click "selected reports, energy savings and use, design heating and cooling loads" then pick the improved package you want a load for. 

It's our experience that TREAT load calc is very close to Manual J - which tends to oversize equipment by 15-40% depending upon how well you intend to fix the home. (I have a client with a 6500 sf 1920's brick mansion that the load calc is 140,000 btu, and the house carries to 5° f with roughly 60,000 btu. We can prove this through Ecobee logging: http://bit.ly/4ecobeethermostats)

Our process is to downsize equipment until we get an undersized warning, then we know we are in the ballpark. If you don't get an undersized warning you are probably too big. 

RSS

Discussion Forum

Basic Heat loss information

Started by Luis Hernandez. Last reply by tedkidd Oct 30, 2014. 1 Reply

How to model a skylight

Started by Luis Hernandez. Last reply by Luis Hernandez Oct 16, 2014. 2 Replies

Modeling the apartment upstairs

Started by Luis Hernandez. Last reply by Ethan MacCormick Sep 26, 2014. 2 Replies

Modeling a Townhouse

Started by Luis Hernandez. Last reply by Luis Hernandez Jul 7, 2013. 4 Replies

Latest Activity

John Nicholas replied to Jerry Needham's discussion Blower door test for small apartment building
"Thank You, Colin!  Those are very good points and processes to do some Zone Pressure…"
3 hours ago
Colin Genge replied to Jerry Needham's discussion Blower door test for small apartment building
"The way we'd normally do this is to mount one blower door in the hallway, then a duct tester…"
7 hours ago
Scott Katznelson replied to Jerry Needham's discussion Blower door test for small apartment building
"Most of the work I do is retrofit of older buildings. Marriage wall leakage is often significant,…"
17 hours ago
John Nicholas replied to Jerry Needham's discussion Blower door test for small apartment building
"Scott Katznelson   In 2013,  I had my HERS Field Review completed on a multi-family…"
17 hours ago
Sean Lintow Sr replied to Jerry Needham's discussion Blower door test for small apartment building
"Sorry but LMAO - one blower door for that small of a space gives you an accurate number for the…"
18 hours ago
Chris Davis posted a blog post
19 hours ago
Scott Katznelson replied to Jerry Needham's discussion Blower door test for small apartment building
"The most accurate way to accomplish this is to have 4 blower doors running at the same time, one…"
22 hours ago
Brett Little posted a discussion

Tour 2 IL New Built Homes - 1 LEED Silver - 1 Zero Energy Ready

During the IL Green Built Home Tour, we looked at 2 homes right down the road from each other to…See More
22 hours ago
Jan Green commented on Pearl Certification's blog post Two National Brands Join Forces Demonstrating Unity in Home Energy-Efficiency Rating Systems
"Congratulations to Pearl for innovative thinking and finding the right path to ensure these homes…"
yesterday
Rob Salcido replied to John Nicholas's discussion Reference Homes for Rating Comparison in the group Home Energy Ratings
"Hello John, Look under the Help Menu in REM/Rate and you should see a "UDRH Syntax…"
yesterday
Rob Salcido joined Evan Mills's group
Thumbnail

Home Energy Ratings

Calculating them; visualizing them; explaining them; selling them .... there is a lot to discuss…See More
yesterday

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service