My training center is presently training the new BPI installer certification.Is anyone else training this course? What is your impression? Have you developed your own curriculum or are you using NYSERDA's curriculum? We are using BPI's props and we are having some issues. Are you having issues with the props too? Any feedback you may have on how the training is structured? Thanks...

Views: 524

Replies to This Discussion

Hey Matt-

We're offering this course monthly, using our own curriculum.  One thing I've done is limit the class size to 4 people.  I like to make sure they're comfortable both passing the exam and actually using these techniques in the field, and with a big class that's tough.  We can do it in 3 days, both airsealing and dense pack.

www.BuildingPerformanceWorkshop.com/training/installer

Thanks Corbett, We have our training setup for a class size of 6 and we use two proctors for the testing.NYSWDA's training center does not in most cases allow trainers to proctor those people that they just trained.  I train the class then two proctors test the class on the 5th day (3 trainees per proctor). We use NYSERDA's curriculm and it breaks down to this:

Monday- Building Science Module

Tuesday- WHALCI

Wednesday-WHALCI

Thursday- WHALCI

Friday- Testing 

So far so good but the props are taking a beating. Depending on the demand we may go to class size of 12 with 3 proctors on test day. I will also need an extra trainer on class days. How's the demand on your end? Is it a required certification in your state?

Corbrett, Are you using the BPI props?

 

Corbett, is the WHALCI mandatory in the new HPwES program there in Ill?

Matt,

We are offering WHALCI at our training facility and the one thing that I did to save the props was make the boxes and flat portions out of 3/4 melamine. The foam sticks very well to the surface. Once it's tested, the foam that is left on the reusable prop can easily be scraped off with a putty knife. I've been using the same props for over a year now and no problems.

Also, as far as I know, ILHPwES is not requiring the installers to be WHALCI certified. They are requiring the Analyst and Envelope Certs for the contractors.

Craig, Thanks. I'll keep your melamine tip in mind. Our props are beat to hell and I will have to replace them shortly.

Hey Matt and Corbett,

My name is Jason Scheurer, and I travel around the country teaching this curriculum for the past year or so and the props do take a beating. But we have noticed if you use the log sealer such as BPI recommends, the sealants come off easier. We  have gone to the Melamine way of things and it works even better. I am an Independent approved Super Proctor for BPI in BA, EP, RBE-WHALC, MF. I usually have up to (12) students in the class for (3) days of training, then another proctor comes in for (3) days and tests up to (4) students per day. We will switch off from training and proctoring since this is the new protocol for BPI. If any of you guys need help with training or proctoring, I am available.

Where did you find that information "log sealer, such as BPI recommends"?

Hi Debra,

NYSWDA tested a number of release agents about 3 years ago and pioneered the use of wax emulsion (log sealer) for their props. One brand is made by UC Coatings and is called Anchorseal which works well to allow foam to release from wood. If you have a lot of area to cover, you can use a garden sprayer to apply it, but a brush is better in most cases.

They also make Bates which works well to allow mastic to release from duct work. 

Thank you.

RSS

Discussion Forum

Curriculum Developers Wanted

Started by Isaac Savage Aug 13, 2014. 0 Replies

Looking for Trainers in the Northeast

Started by Gary Baggett Feb 14, 2014. 0 Replies

2013 Manual-S Speedsheet Now Available

Started by Isaac Savage Apr 7, 2013. 0 Replies

Protecting presentations

Started by Paul Raymer. Last reply by Tom Conlon Nov 1, 2012. 5 Replies

Conflict Resolution

Started by Chase Counts. Last reply by Rodney Purnell Oct 17, 2012. 7 Replies

Latest Activity

tedkidd replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"Yeah. Gas water…"
2 hours ago
Eric Kjelshus replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"With super cheap natural gas prices now, still worth going all electric?  Tankless needs a lot…"
3 hours ago
Stuart Langley liked Chris Clay's photo
8 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Stuart, I wasn't considering the copula windows... yes, those would indeed need to be…"
10 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"Well, @David Butler, you have seen the property more accurately than I have, but my impression of…"
10 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"@ Stuart,I don't think there's any concern about impact of 4" build-up on elevation…"
10 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"So this building has a few issues with air leaks and air leaks have so much to do with discomfort…"
11 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"John Hatfield has the right idea here for a new roof deck. Polyiso boards always need a good stout…"
11 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service