I just published this detailed post on solar pv vs. wind turbines for installations of the same cost:

http://homeenergypros.lbl.gov/profiles/blogs/residential-solar-pv-vs

 

I'm starting to come to the conclusion that except for a few spots in the U.S. (mostly in AK, HI, or on top of mountains) residential wind will always lose to solar PV assuming optimal locations for both (i.e. no shading on solar panels, no obstructions blocking wind) and the same capital outlay at the onset.  

 

I'm going to work on another blog post highlighting this fact, because it is rarely covered by most news media who don't even know the difference between a kW and a kWh, let alone know how to do the analysis themselves.  

 

What I'm looking for is someone who can tell me I am missing something in the analysis?  Any thoughts?

Tags: comparison, solar, vs., wind

Views: 143

Replies to This Discussion

@Chris - I'm not sure it's entirely fair to simply "halve" the cost of a PV system, particularly one that small, simply based on nameplate capacity. You still need to install all of the BOS components, etc.

 

@Leo - I sincerely doubt that articulation alone can double PV production, especially that far north. Articulating optimization tends to be more effective at lower lattitudes. I suspect that a PV system in MN gains a significant percentage of production efficiency simply because it is COLD there. Systems loose a lot when the heat increases.

 

Great to see this discussion!

I agree Mark. My wild guess on doubling PV output has no place in a serious discussion like this. That's how misinformation gets its start.

Remember the PV system was tracking the sun daily and seasonally which for residential roof top installations would be difficult if not impractical. It appears that PV comes out better with tracking unless the residence has an above average wind site i.e. higher ground in west or southwest Minnesota.

RSS

Discussion Forum

Latest Activity

Profile IconSean Wiens and David Butler joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
2 hours ago
Profile IconSean Wiens and David Butler joined Mark Richardson's group
Thumbnail

Renewable Energy

This group will focus on the issues associated with incorporating renewable energy sources like…See More
2 hours ago
Al Tibbs posted photos
3 hours ago
Al Tibbs replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"In any case where there is visible mold present, I would begin with a thorough VISUAL assessment of…"
3 hours ago
Al Tibbs joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
3 hours ago
David Byrnes posted a blog post

Strategies for Hiring and Interviewing for Home Performance Professionals

Hire slow and fire fast.  It’s a phrase that experienced managers and human resources professionals…See More
4 hours ago
David Butler posted discussions
4 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"Static pressure drop through a straight length of pipe is a function of friction rate, and friction…"
9 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service