We are planning an energy audit in southern Wisconsin on a mid-rise building where every apartment has a self-contained Anderson "Magic Pak" HVAC unit. These are a combo NG furnace/package AC ducted forced air system, set into a three foot by four foot grille in an exterior wall for condenser cooling and furnace exhaust.

Since these buildings are in a heating-dominant climate, getting good SSE readings on the existing units is important to me. The furnace exhaust ports out a short tube through the grille directly to outdoors. I think we can test the first floor units from outdoors -- the results seem to vary a little depending on just where the combustion probe in in the exhaust stream.

Does anyone know how we could test second-floor (and higher) units without humping a ladder all the way around the building?? Anyone have literature or experience drilling into the exhaust stream somewhere from the building side of the unit?

Views: 301

Replies to This Discussion

second-floor (and higher) units without humping a ladder all the way around the building is a very complicated task and i think cant be possible here

Thanks
website

Yes,

Get a bucket truck!

RSS

Discussion Forum

Testing "Magic Pak" units??

Started by Don Hynek. Last reply by Rich Manning Jun 2, 2016. 2 Replies

Blower Door Applications Guide

Started by Kim Tanner. Last reply by Colin Genge Aug 3, 2015. 1 Reply

Job opening: Multifamily Services Manager

Started by Jonathan Beers Mar 16, 2015. 0 Replies

Latest Activity

Shawna Henderson posted a discussion

Exterior Insulation for Deep Energy Retrofits

Heya! I've been lurking for a while on the various formats that came together for the HEP Forum.…See More
36 minutes ago
Dannie Jackson liked Allison A. Bailes III's group HVAC
23 hours ago
Dannie Jackson added a discussion to the group Energy Efficient Design
23 hours ago
Dannie Jackson liked Barry NewDelman's discussion Help your Clients save, THEN do what you do best
yesterday
Dannie Jackson replied to Barry NewDelman's discussion Whats the Consensus of this group Define "Energy Efficiency" in the group Energy Efficient Design
"Design wise I would say that energy efficiency is defined by the Btu / square foot.  This is…"
yesterday
Dannie Jackson joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
yesterday
Dannie Jackson liked Chris Laumer-Giddens's group Energy Efficient Design
yesterday
Dannie Jackson posted a blog post
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service