TEC and Camroden Associates have released their big building testing manual, Blower Door Applications Guide: Beyond Single Family Residential.

This book is authored by Terry Brennan and Mike Clarkin of Camroden Associates, and Gary Nelson, Collin Olson and Paul Morin of The Energy Conservatory. 

This document has been developed by the hard work of the authors based on their years of experience and research testing buildings that are beyond single family residential units. We have tried to provide a basic understanding of the steps involved with testing larger and more complicated buildings.

This book is divided into three basic sections. Chapters 1, 2 and 3 describe all of the information and preparation needed before a test can be performed. Chapter 4 provides information on testing buildings using equipment from The Energy Conservatory (TEC) of Minneapolis, MN, USA. Chapters 5 and 6 concern work after the test is done such as finding leaks and writing the report. The Appendices provide some working terminology and hazard analysis.


The authors intend that this document will be periodically updated as more information is gathered and more test procedures are defined. 

Click to view and download a PDF version of the book or download the attached file.
http://www.energyconservatory.com/sites/default/files/documents/blo...

Tags: Associates, Beyond, Camroden, Multi-fan, Residential, TEC, blower, building, commercial, door, More…testing

Views: 199

Attachments:

Replies to This Discussion

This is a great guide that anyone testing with multiple fans should get hold  of. 

RSS

Discussion Forum

Testing "Magic Pak" units??

Started by Don Hynek. Last reply by Rich Manning Jun 2, 2016. 2 Replies

Blower Door Applications Guide

Started by Kim Tanner. Last reply by Colin Genge Aug 3, 2015. 1 Reply

Job opening: Multifamily Services Manager

Started by Jonathan Beers Mar 16, 2015. 0 Replies

Latest Activity

Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
14 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
15 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"I never checked that before. Checking now... Section M1502.4.2 of the International Residential…"
15 hours ago
Joseph Frasier is now a member of Home Energy Pros Forum
15 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"Brendan, Thanks for that response. Because of your warning, I just went down to the basement and…"
19 hours ago
Brendan Reid replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don, Summary: DRYER VENT: screws bad idea, possibly prohibited by code. METAL DUCT: must be…"
19 hours ago
Profile IconBrendan Reid and David Butler joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
19 hours ago
Profile IconSean Wiens and David Butler joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service