Too many thermographers leave their imagers in the case during the summer. This comes, in part, from the way we used to work when imagers were not nearly as sensitive and our understanding of how to use them was limited to winter work.

Get the darned thing out and use it! In most places, on most mornings, you can get successful "winter" images; if not, keep the home closed up for the night and add a bit of heat in the morning before you arrive.

Once the day warms, heat flow and thermal patterns will reverse. On days when the sun is intense, direct solar loading will make exterior work impossible during the daytime and even interior work will require patience and understanding of how the sun affects things. But it is not impossible by any means!

A few hours after sunset if the evening is warm and the AC on, imaging can be spectacular from both inside and outside.

With a blower door and the building depressurized, air leakage will nearly always be detectable. The image below of a house in the Bay area on a warm early afternoon shows poorly placed figberglass batts in a cathedral ceiling.

Want to learn more? My colleague, Matt Schwoegler, will be presenting a (paid) webinar on July 6 on Warm Weather Thermography. See http://www.thesnellgroup.com/Content/thermal-solutions-conference.aspx for details. You can also see his recent excellent article in the May/June issue of Home Energy Magazine.

I'd encourage all readers to take their imagers to every single job. If you don't get good images, think about why you didn't and, when possible, modify your protocols so the next time you have a better chance. 

John

The Snell Group

www.IRTalk.com

www.thesnellgroup.com

Views: 1806

Replies to This Discussion

I've got a few inspections in two weeks time.  With my Ti32 and a blower door, I am good to go.  (Sometimes I really don't even need the blower door.   It's all about having the right training, and the right tools at your disposal.

If my memory is good, RESNET talk of a deltaT of only 3°F for conducting an infrared inspection with blower door: it happens many times and its' about a 100 mK NETD. here are some image with my Ti32. infiltration may be warm or hot, but you can see it almost always

 

 

 

The 3F delta is for locating air leakage under RESNET. For locating insulation issues, an 18F delta is required. I agree we can often get by with less of a difference if we understand the conditions, know what we are doing and have a more sensitive imager—I favor something around 50mK, which is much more than 2X the sensitivity of a 100mK system. As always, Davide, very nice images!
Typically there are several reasons "hot work" is not as easy as working with cooler temperatures, and Matt will discuss these in his webinar next week. First, the delta-temperature (inside to outside) is usually not as great. Second, the sun loads the walls. While this may help, often is just confuses things. Finally, as materials cool quickly after a sunny day, differences in thermal capacitance reveal themselves; again, this may help but is often confusing. The attached image shows an exterior in the summer on a clear evening with AC running. The cement board siding has cooled quickly. The 3.5" FG batt insulation is in place. Is it working or only working poorly is it an issue of seeing cooling siding/still warm framing or a combination of the factors? I find getting good results from summer thermography typically requires experience and skill, patience and a sensitive imaging system.

I have been setting up to inspect about 200 attics that are most likely completely out of compliance with ours(and any) reputable program specs.  While testing a couple of remote camera configurations, I made a pass through the attic with my IR camera.  As my attic was done correctly, The baffles (as shown on the left) were easy to spot.

 

RSS

Discussion Forum

Having some fun with our cameras

Started by Mike Pagozalski. Last reply by Mike Pagozalski Jul 31, 2017. 2 Replies

Expert Eye Needed

Started by Matthew P. Last reply by Ed Minch Nov 15, 2014. 17 Replies

Google Thermal View?

Started by Joshua Knittel. Last reply by tedkidd Jun 1, 2013. 4 Replies

Infrared Image - What is it?

Started by Fluke Thermal Imaging. Last reply by Dale Sherman Apr 26, 2012. 6 Replies

Latest Activity

Sara Watson posted a blog post

6 Tips to Pick Out The Best Solar Outdoor Lights

You have a beautiful home in Florida and plan to add a little sparkle to your front garden, patio,…See More
12 hours ago
DesignTech liked DesignTech's photo
14 hours ago
Anthony Roy is now a member of Home Energy Pros Forum
yesterday
Barbara Smith commented on Barbara Smith's video
yesterday
Barbara Smith replied to Jignesh's discussion Efficiency of furnace
"Installation and proper sizing is important to getting the best performance out of your furnace.…"
yesterday
Barbara Smith replied to Jignesh's discussion Best brands for furnace
"Check ENERGY STAR and Consumer Reports.…"
yesterday
Barbara Smith replied to Diane Chojnowski's discussion Support Mike Rogers, a long-time home performance hero, as he battles sinus cancer. in the group News & Announcements
yesterday
Barbara Smith joined Diane Chojnowski's group
Thumbnail

News & Announcements

Share your news and announcements with the community in this group.To post news or an announcement,…See More
yesterday
Diane Chojnowski added a discussion to the group News & Announcements
Thumbnail

Support Mike Rogers, a long-time home performance hero, as he battles sinus cancer.

Support Mike Rogers, a long-time home performance hero, as he battles sinus cancer. Write a note, a…See More
yesterday
Eric Kjelshus replied to Jignesh's discussion Efficiency of furnace
"I like looking at system efficiency - Lets say the you have a 95% gas using furnace 100,000…"
yesterday
Cameron Home Insulation replied to Jim Conlon's discussion Insulation Blower Recommendations?
"Hi, Rent a Cellulose Insulation Blower from your local Home Depot. Get more information about…"
yesterday
Todd Abercrombie liked Barbara Smith's video
Saturday
Jim Hensen replied to Jignesh's discussion Efficiency of furnace
"Great question - what the efficiency rating means is one of the most common questions we we asked.…"
Saturday
Michael Schettine's blog post was featured

Framing production combined with air sealing

Building Tighter Homes with Gasketed FramingIf you follow our blog, you know that we talk quite a…See More
Friday
Profile IconMichael E and Jason Dion joined Home Energy Pros Forum
Friday
Jason Dion joined Sean Lintow Sr's group
Thumbnail

Best Practices (Residential)

Best Building, Retrofitting, or even Auditing Practices - what are they, what should change, what…See More
Friday
Jason Dion joined Michael Stuart's group
Thumbnail

INFRARED THERMOGRAPHY USERS

This group is dedicated to knowledge sharing and discussion of infrared thermography for building…See More
Friday
Jason Dion joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
Friday
Jason Dion joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
Friday
Jason Dion joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
Friday

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service