Too many thermographers leave their imagers in the case during the summer. This comes, in part, from the way we used to work when imagers were not nearly as sensitive and our understanding of how to use them was limited to winter work.

Get the darned thing out and use it! In most places, on most mornings, you can get successful "winter" images; if not, keep the home closed up for the night and add a bit of heat in the morning before you arrive.

Once the day warms, heat flow and thermal patterns will reverse. On days when the sun is intense, direct solar loading will make exterior work impossible during the daytime and even interior work will require patience and understanding of how the sun affects things. But it is not impossible by any means!

A few hours after sunset if the evening is warm and the AC on, imaging can be spectacular from both inside and outside.

With a blower door and the building depressurized, air leakage will nearly always be detectable. The image below of a house in the Bay area on a warm early afternoon shows poorly placed figberglass batts in a cathedral ceiling.

Want to learn more? My colleague, Matt Schwoegler, will be presenting a (paid) webinar on July 6 on Warm Weather Thermography. See http://www.thesnellgroup.com/Content/thermal-solutions-conference.aspx for details. You can also see his recent excellent article in the May/June issue of Home Energy Magazine.

I'd encourage all readers to take their imagers to every single job. If you don't get good images, think about why you didn't and, when possible, modify your protocols so the next time you have a better chance. 

John

The Snell Group

www.IRTalk.com

www.thesnellgroup.com

Views: 1759

Replies to This Discussion

I've got a few inspections in two weeks time.  With my Ti32 and a blower door, I am good to go.  (Sometimes I really don't even need the blower door.   It's all about having the right training, and the right tools at your disposal.

If my memory is good, RESNET talk of a deltaT of only 3°F for conducting an infrared inspection with blower door: it happens many times and its' about a 100 mK NETD. here are some image with my Ti32. infiltration may be warm or hot, but you can see it almost always

 

 

 

The 3F delta is for locating air leakage under RESNET. For locating insulation issues, an 18F delta is required. I agree we can often get by with less of a difference if we understand the conditions, know what we are doing and have a more sensitive imager—I favor something around 50mK, which is much more than 2X the sensitivity of a 100mK system. As always, Davide, very nice images!
Typically there are several reasons "hot work" is not as easy as working with cooler temperatures, and Matt will discuss these in his webinar next week. First, the delta-temperature (inside to outside) is usually not as great. Second, the sun loads the walls. While this may help, often is just confuses things. Finally, as materials cool quickly after a sunny day, differences in thermal capacitance reveal themselves; again, this may help but is often confusing. The attached image shows an exterior in the summer on a clear evening with AC running. The cement board siding has cooled quickly. The 3.5" FG batt insulation is in place. Is it working or only working poorly is it an issue of seeing cooling siding/still warm framing or a combination of the factors? I find getting good results from summer thermography typically requires experience and skill, patience and a sensitive imaging system.

I have been setting up to inspect about 200 attics that are most likely completely out of compliance with ours(and any) reputable program specs.  While testing a couple of remote camera configurations, I made a pass through the attic with my IR camera.  As my attic was done correctly, The baffles (as shown on the left) were easy to spot.

 

RSS

Discussion Forum

Having some fun with our cameras

Started by Mike Pagozalski. Last reply by Mike Pagozalski Jul 31. 2 Replies

Expert Eye Needed

Started by Matthew P. Last reply by Ed Minch Nov 15, 2014. 17 Replies

Google Thermal View?

Started by Joshua Knittel. Last reply by tedkidd Jun 1, 2013. 4 Replies

Infrared Image - What is it?

Started by Fluke Thermal Imaging. Last reply by Dale Sherman Apr 26, 2012. 6 Replies

Latest Activity

Profile IconTim MacAloney and Todd Abercrombie joined Home Energy Pros Forum
yesterday
Lucyna de Barbaro liked David Eggleton's group 1000 Home Challenge
yesterday
Steven Lefler's photo was featured
yesterday
Brad Cook replied to Dav Camras's discussion Low Leakage home with cathedral ceiling
"It is all about the dewpoint. Think of the roof system as a big box. Air can circulate in, out and…"
yesterday
David Butler replied to Dav Camras's discussion Experience with new energy monitoring tools such as Curb, Sense, Nerio and Smapee
"@Dav, 240-volt circuits are dedicated to a single appliance so circuit monitoring with CT's…"
Thursday
Dav Camras replied to Dav Camras's discussion Experience with new energy monitoring tools such as Curb, Sense, Nerio and Smapee
"I have been thinking about putting it on my own home as you suggest, and was wondering which, if…"
Thursday
Profile IconGrady Harper, Christina Savage, gregory sutliff and 1 more joined Home Energy Pros Forum
Thursday
Doug Mullins added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

Blower Door equipment for sale

I have 5 ea Retrotec 6000 blower door fans - $3500.00 ea1 3000 series fan with WiFi -…See More
Thursday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service