Too many thermographers leave their imagers in the case during the summer. This comes, in part, from the way we used to work when imagers were not nearly as sensitive and our understanding of how to use them was limited to winter work.

Get the darned thing out and use it! In most places, on most mornings, you can get successful "winter" images; if not, keep the home closed up for the night and add a bit of heat in the morning before you arrive.

Once the day warms, heat flow and thermal patterns will reverse. On days when the sun is intense, direct solar loading will make exterior work impossible during the daytime and even interior work will require patience and understanding of how the sun affects things. But it is not impossible by any means!

A few hours after sunset if the evening is warm and the AC on, imaging can be spectacular from both inside and outside.

With a blower door and the building depressurized, air leakage will nearly always be detectable. The image below of a house in the Bay area on a warm early afternoon shows poorly placed figberglass batts in a cathedral ceiling.

Want to learn more? My colleague, Matt Schwoegler, will be presenting a (paid) webinar on July 6 on Warm Weather Thermography. See http://www.thesnellgroup.com/Content/thermal-solutions-conference.aspx for details. You can also see his recent excellent article in the May/June issue of Home Energy Magazine.

I'd encourage all readers to take their imagers to every single job. If you don't get good images, think about why you didn't and, when possible, modify your protocols so the next time you have a better chance. 

John

The Snell Group

www.IRTalk.com

www.thesnellgroup.com

Views: 1936

Replies to This Discussion

I've got a few inspections in two weeks time.  With my Ti32 and a blower door, I am good to go.  (Sometimes I really don't even need the blower door.   It's all about having the right training, and the right tools at your disposal.

If my memory is good, RESNET talk of a deltaT of only 3°F for conducting an infrared inspection with blower door: it happens many times and its' about a 100 mK NETD. here are some image with my Ti32. infiltration may be warm or hot, but you can see it almost always

 

 

 

The 3F delta is for locating air leakage under RESNET. For locating insulation issues, an 18F delta is required. I agree we can often get by with less of a difference if we understand the conditions, know what we are doing and have a more sensitive imager—I favor something around 50mK, which is much more than 2X the sensitivity of a 100mK system. As always, Davide, very nice images!
Typically there are several reasons "hot work" is not as easy as working with cooler temperatures, and Matt will discuss these in his webinar next week. First, the delta-temperature (inside to outside) is usually not as great. Second, the sun loads the walls. While this may help, often is just confuses things. Finally, as materials cool quickly after a sunny day, differences in thermal capacitance reveal themselves; again, this may help but is often confusing. The attached image shows an exterior in the summer on a clear evening with AC running. The cement board siding has cooled quickly. The 3.5" FG batt insulation is in place. Is it working or only working poorly is it an issue of seeing cooling siding/still warm framing or a combination of the factors? I find getting good results from summer thermography typically requires experience and skill, patience and a sensitive imaging system.

I have been setting up to inspect about 200 attics that are most likely completely out of compliance with ours(and any) reputable program specs.  While testing a couple of remote camera configurations, I made a pass through the attic with my IR camera.  As my attic was done correctly, The baffles (as shown on the left) were easy to spot.

 

RSS

Discussion Forum

Having some fun with our cameras

Started by Mike Pagozalski. Last reply by Mike Pagozalski Jul 31, 2017. 2 Replies

Expert Eye Needed

Started by Matthew P. Last reply by Ed Minch Nov 15, 2014. 17 Replies

Google Thermal View?

Started by Joshua Knittel. Last reply by tedkidd Jun 1, 2013. 4 Replies

Infrared Image - What is it?

Started by Fluke Thermal Imaging. Last reply by Dale Sherman Apr 26, 2012. 6 Replies

Latest Activity

Brett Little posted an event
Thumbnail

Green Rater LEED Credential Online Training at Online

September 5, 2018 at 12pm to September 6, 2018 at 5pm
With over 450,000 LEED® for Homes™ spaces worldwide, LEED is the international rating system to…See More
1 hour ago
Michael Schettine commented on Michael Schettine's video
Thumbnail

AccuFrame Water Test

"The Like button doesn't work on this site..."
13 hours ago
Franco Oyuela commented on Mike Muras's blog post "Practical Standards to Measure HVAC System Performance" Rob "Doc" Falke 04/17/2006
"It's important to evaluate and inspect a system regularly to make sure it's at optimal…"
19 hours ago
Seventhwave posted an event

HVAC technology enhancements for energy conservation at The Marq

October 4, 2018 from 8:30am to 4pm
Join us to learn how to get the largest energy savings in your commercial buildings. HVAC as a…See More
23 hours ago
Peter Krych replied to Dav Camras's discussion Adding blown insulation to poorly installed batts?
"I agree, it is wasteful to remove and dump old insulation. I still does its job. Air sealing is…"
yesterday
Michael Schettine commented on Michael Schettine's video
Thumbnail

AccuFrame Water Test

"With the conversion rate that- air is 800 time LESS dense than water at sea-level…"
yesterday
Michael Schettine posted a video

AccuFrame Water Test

In this short video, water is used to visualize air leakage sites that are present in the majority of framed walls in the US. New regulations require better ...
yesterday
Sam Feder liked Dav Camras's discussion Adding blown insulation to poorly installed batts?
yesterday
Chris Stratton liked Don Fugler's discussion Choosing a range hood
yesterday
Dave Taylor replied to Jerry Needham's discussion VERY TIGHT HOME WITH OVER SIZED AC
"Jerry, you should look at Buildingscience.com" High Mass Walls" 105 paper for more…"
yesterday
Jill Lindman's 3 events were featured
yesterday
Jill Lindman posted events
yesterday
Diane Chojnowski posted videos
yesterday
Don Fugler replied to Don Fugler's discussion Choosing a range hood in the group Kitchen Ventilation
"Has anyone installed a range hood in an older home with the ducting down to the basement and out…"
Thursday
Profile IconEileen Kraus-Dobratz, VENI MITTAL and Mark A McCrumb joined Home Energy Pros Forum
Thursday
Brian Robinson replied to Dav Camras's discussion Adding blown insulation to poorly installed batts?
"YES, YES, & YES!!! Bat droppings, mouse droppings, dead mice, nuts, seeds, acorns, lack of…"
Wednesday
Matt Peterson posted a blog post

The Importance of keeping Professionally Trained Gas Line Installation Technicians happy and loving their jobs!

Our company is very much a family to us, we strive to bring in and develop great people into great…See More
Wednesday
Profile Iconyanky fogel, Kathleen Krebs, Nicholas Rubenstein and 3 more joined Home Energy Pros Forum
Wednesday
yanky fogel liked Home Energy Magazine's video
Tuesday
Franco Oyuela commented on Shawn Weeks's blog post How Homeowners Can Keep Electricity Costs Down in Summer Months
"Cutting back on air conditioning is also good for the environment because it reduces carbon…"
Tuesday

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service