I'm working on an IR workshop that will be held at U North Dakota, Grand Forks in mid April. Cosponsors including UND, WAPA, and my organization, Clean Energy Ambassadors. We serve municipal utilities and co-ops in the West--esp the upper Midwest. We are working with Flir and Fluke, though it's a non-commercial 1.5 day intro on both power system and building uses.  Question: do you or someone you know work with a community utility energy audit program & have a great case study? We can pay travel for a great case study speaker. Something like imaging street-by-street and following up with an offer, or tying in with a local sponsor to reduce the cost of the service? Let me know, pls. Jill  See our page at www.cleanenergyambassadors.ning.com

Tags: IR, utility, workshop

Views: 170

Replies to This Discussion

Hi Jill,
I am a HERS rater and do audits for utilities in the Grand Forks area.  I did an audit on a friend's home a while back.  This was a HERS-type audit, not IR.  Didn't need IR to see her walls were not insulated!  After doing the recommended improvements, she reports her monthly heating bills have dropped by 25 - 40%.
I'm not sure what kind of case studies I can  provide, but I am willing to help if I can.  Travel costs would be zero!  :-)
Best regards,
Henry
Henry- Thanks so much for this offer. We held out for a utility guy-- and will have someone from Cedar Rapids who has 3 different program components at their utility IR Program-- 1) an IR flyover (cool!) 2) street-level neighborhood shots 3) energy audit enhancement. We really want utilities to explore these options. Many of them will be working with local contractors. I hope you'll check out www.cleanenergyambassadors.ning.com, where we have a registration flier posted.
Hi Jill,
Is there an itenary or syllabus available somewhere?  Want to make sure it's not redundant to the Level I training I've already done.
Without being ridiculously promotional, I urge folks to go to www.cleanenergyambassadors.ning.com to download a registration form
Yes, I've seen the registration form. 
 
I just can't find any detailed info on exactly what will be covered in the 1.5 days.  Is there an itinerary, list of topics, or a speakers list available?
Anyone interested can send an email to me via cleanenergyambassador@gmail.com and I'll send the info right along.

Are you looking at scanning power lines for 'phantom' loads, ''Hot' lines, over heated lines or is this for home energy auditing?

Utility energy auditing for commercial use utilizes power consumption. Is this what you are looking for as IR is not part of that scenario. Meter draw and equipment draw are usually monitored. We do utilizde IR for overloaded motors and some heat ed lines and breakers.

Check my site www.nyinfraredscan.com and see if this is what you are looking for.

We do IR in conjunction with a blower door to discover energy leaks, missing insulation, phantom loads on meter boxes, and moisture problems.

Allen

Level III ASNT

Thanks-- I will check this out. We've dealt with a wide range of needs. WAPA has an equipment loan program and has supported basic training for both utility distribution system applications and basic energy auditing. Amazing what those cameras can do! My guess is that we will be sticking closer to our region for support, but I am welcoming folks from our Clean Energy network to join this IR group.

I am an Infrared trainer with Infraspection Institute and on the IR training committee at RESNET being sponsored at Disney Hilton Feb 27 this week. If you have need of an IR trainer for your business or have further questions; contact me please.

allen

Hello Jill:

I wanted to see if you had interest with the support of The Snell Group. We have worked together with WAPA to provide weatherization infrared training in the past along with training the WAPA transmission group. Please let me know how we might assist with your workshop or other opportunities going forward...

Best Regards. ~Mark

Thanks!! I have known about the Snell Group for many years-- Good news. As we're almost set, but a little light in the buildings area, maybe we could get a handout from you? Can you find me at CleanEnergyAmbassadors.ning.com I guess we'll have to "friend" on this service. I am traveling so won't get to that til the end of the week. more later...

Hi Jill,

 

I have tried to register through your CleanEnergyAmbassadors.ning.com and when I reply to the email I get an error message. Can you please email directly at mcleminson@thesnellgroup.com, so we can connect and I can get you some materials for the workshop...

 

RSS

Discussion Forum

Having some fun with our cameras

Started by Mike Pagozalski. Last reply by Mike Pagozalski Jul 31. 2 Replies

Expert Eye Needed

Started by Matthew P. Last reply by Ed Minch Nov 15, 2014. 17 Replies

Google Thermal View?

Started by Joshua Knittel. Last reply by tedkidd Jun 1, 2013. 4 Replies

Infrared Image - What is it?

Started by Fluke Thermal Imaging. Last reply by Dale Sherman Apr 26, 2012. 6 Replies

Latest Activity

Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
13 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
14 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"I never checked that before. Checking now... Section M1502.4.2 of the International Residential…"
15 hours ago
Joseph Frasier is now a member of Home Energy Pros Forum
15 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"Brendan, Thanks for that response. Because of your warning, I just went down to the basement and…"
19 hours ago
Brendan Reid replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don, Summary: DRYER VENT: screws bad idea, possibly prohibited by code. METAL DUCT: must be…"
19 hours ago
Profile IconBrendan Reid and David Butler joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
19 hours ago
Profile IconSean Wiens and David Butler joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service