We thought it'd be fit to share this infrared image we received from group member, CK Ang, in New Zealand. Just wanted to spark some discussion here on what you guys think this image is of, and what the problem could be. 

A little background on the photo:
  • Image was taken with a Fluke Ti55FT thermal imager with a telephoto lens, as to not get too close.
  • Emissivity setting for the image was set to .20, which may be generous considering what the material appears to be made of.


CK - feel free to add any additional comments that might help steer the group members in the right direction! And thanks again for the image. We'll post up the visible light image & answer by Thursday.

Tags: Ang, CK, Fluke, Ti55FT, image, imager, infrared, lens, telephoto, thermal

Views: 440

Replies to This Discussion

Here is a fun image I took recently as part of my collection of "low-emissivity" buildings...

Thermally yours!

John Snell

www.thesnellgroup.com

www.IRTalk.com

Attachments:

Hmmmm... perhaps a corrugated tin or copper roof with a decorative railing around it?   The High-Contrast palette really makes it difficult to interpret and place this image.   How about a hint or a palette change for us?

Corrugated and galvanized metal siding on a building with a handicap ramp and railing in front. Interesting ot me is the moire pattern created at this angle of view.

I was close in materials at least!  ;-)     Part of the pattern may be directly related to the palette presentation.  I have found that because of the  "unnatural" color juxtapositions in the High-Contrast color palette, there can often be odd patterns that occur when diagonal angles are present.   High-Contrast color palettes, in general, just don't "blend" colors like some other choices. They can also appear to be more susceptible to "noise".  This makes them really pull out details, but sometimes at the expense of smoothness or ease of interpretation.   Definitely an interesting image nontheless!

really great image, i think very good for courses.

i'd like to get, as said in the starting post, the visual image !

John, do you have a visual of your image too ?

Some kind of cast manifold with a cooling liquid in the lower half.

RSS

Discussion Forum

Having some fun with our cameras

Started by Mike Pagozalski. Last reply by Mike Pagozalski Jul 31, 2017. 2 Replies

Expert Eye Needed

Started by Matthew P. Last reply by Ed Minch Nov 15, 2014. 17 Replies

Google Thermal View?

Started by Joshua Knittel. Last reply by tedkidd Jun 1, 2013. 4 Replies

Infrared Image - What is it?

Started by Fluke Thermal Imaging. Last reply by Dale Sherman Apr 26, 2012. 6 Replies

Latest Activity

Brett Little posted an event
Thumbnail

Green Rater LEED Credential Online Training at Online

September 5, 2018 at 12pm to September 6, 2018 at 5pm
With over 450,000 LEED® for Homes™ spaces worldwide, LEED is the international rating system to…See More
Saturday
Michael Schettine commented on Michael Schettine's video
Thumbnail

AccuFrame Water Test

"The Like button doesn't work on this site..."
Saturday
Franco Oyuela commented on Mike Muras's blog post "Practical Standards to Measure HVAC System Performance" Rob "Doc" Falke 04/17/2006
"It's important to evaluate and inspect a system regularly to make sure it's at optimal…"
Friday
Seventhwave posted an event

HVAC technology enhancements for energy conservation at The Marq

October 4, 2018 from 8:30am to 4pm
Join us to learn how to get the largest energy savings in your commercial buildings. HVAC as a…See More
Friday
Peter Krych replied to Dav Camras's discussion Adding blown insulation to poorly installed batts?
"I agree, it is wasteful to remove and dump old insulation. I still does its job. Air sealing is…"
Friday
Michael Schettine commented on Michael Schettine's video
Thumbnail

AccuFrame Water Test

"With the conversion rate that- air is 800 time LESS dense than water at sea-level…"
Friday
Michael Schettine posted a video

AccuFrame Water Test

In this short video, water is used to visualize air leakage sites that are present in the majority of framed walls in the US. New regulations require better ...
Friday
Sam Feder liked Dav Camras's discussion Adding blown insulation to poorly installed batts?
Thursday
Chris Stratton liked Don Fugler's discussion Choosing a range hood
Thursday
Dave Taylor replied to Jerry Needham's discussion VERY TIGHT HOME WITH OVER SIZED AC
"Jerry, you should look at Buildingscience.com" High Mass Walls" 105 paper for more…"
Thursday
Jill Lindman's 3 events were featured
Thursday
Jill Lindman posted events
Thursday
Diane Chojnowski posted videos
Thursday
Don Fugler replied to Don Fugler's discussion Choosing a range hood in the group Kitchen Ventilation
"Has anyone installed a range hood in an older home with the ducting down to the basement and out…"
Thursday
Profile IconEileen Kraus-Dobratz, VENI MITTAL and Mark A McCrumb joined Home Energy Pros Forum
Thursday
Brian Robinson replied to Dav Camras's discussion Adding blown insulation to poorly installed batts?
"YES, YES, & YES!!! Bat droppings, mouse droppings, dead mice, nuts, seeds, acorns, lack of…"
Wednesday
Matt Peterson posted a blog post

The Importance of keeping Professionally Trained Gas Line Installation Technicians happy and loving their jobs!

Our company is very much a family to us, we strive to bring in and develop great people into great…See More
Wednesday
Profile Iconyanky fogel, Kathleen Krebs, Nicholas Rubenstein and 3 more joined Home Energy Pros Forum
Wednesday
yanky fogel liked Home Energy Magazine's video
Tuesday
Franco Oyuela commented on Shawn Weeks's blog post How Homeowners Can Keep Electricity Costs Down in Summer Months
"Cutting back on air conditioning is also good for the environment because it reduces carbon…"
Tuesday

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service