Hi everyone,

   I am new at understanding how to read an infrared camera. I want to see what a wall looks like with or without insulation. Here's my question:

Does there need to be a temperture difference from the inside of the house  to the outside to see if there is insulation in the walls?

What should that difference be? ie 15 degrees.

Do you ask the homeowner to turn up the heat in the winter or turn on the A/C in the summer.

How best do I find out if there is insulation in those walls?

Thanks for your comments

Judi Lyall w/ SHE BUILDS GREEN

Views: 3067

Replies to This Discussion

Thanks John, i appreciate you taking the time to answer my quirey. do you know what the indoor ambient temperature was at the time of the photo? thanks again for helping me understand.

Dale,

I looked up the BD test.  At the start of the Blower Door the inside was 70 and the outside was 43.  From what I remember, the outside didn't change much all day.

Judy

An important thing to remember is that the delta T (temperature difference) that's needed refers to "surface" to "surface" differences when investigation insulation issues.  Ambient temperatures can be a little misleading sometimes when we are investigating energy transmission issues.  For example, If the interior has a surface temperature of 70F and the exterior ambient is 30F we would think that the heat would move from inside to outside (2nd law of thermodynamics - hot to cold).  But what if you are looking (from the inside) at a south wall that has been effected by the sun for a few hours?  That wall might be 120F.  Now the heat movement is from outside to inside.  Missing insulation would look warm from the inside.  And if you go over and look at a north wall, which is not effected by the sun, missing insulation would look cool.  So, I always ask myself: What's the direction of the heat movement surface to surface, inside to outside or outside to inside?  And then I identify the color of the path of least resistance.  The framing members should be the path of least resistance in a fully insulated wall.  If insulation is compromised or missing then it will show as the path of least resistance.   That being said, air leaks usually require much less of a temperature differential, maybe only 3 degrees F and that is ambient to ambient, not surface to surface.  The sensitivity of the camera detector system can certainly have a positive or negative effect on the delta T needed in both scenarios.

RSS

Discussion Forum

Having some fun with our cameras

Started by Mike Pagozalski. Last reply by Mike Pagozalski Jul 31. 2 Replies

Expert Eye Needed

Started by Matthew P. Last reply by Ed Minch Nov 15, 2014. 17 Replies

Google Thermal View?

Started by Joshua Knittel. Last reply by tedkidd Jun 1, 2013. 4 Replies

Infrared Image - What is it?

Started by Fluke Thermal Imaging. Last reply by Dale Sherman Apr 26, 2012. 6 Replies

Latest Activity

Profile IconSonny Roncancio and Chester Energy & Policy joined Home Energy Pros Forum
13 hours ago
Ryan Moore updated an event
Thumbnail

LEED for Homes Green Rater Training at Fort Collins, CO

December 7, 2017 to December 8, 2017
Green Insight will host this 2-day training in Fort Collins, CO December 7-8,…See More
yesterday
Rodney Bailey liked Rodney Bailey's discussion Energy audit equipment for sale.
yesterday
tedkidd liked Mike Rogers's blog post Focusing on payback to motivate customers?
yesterday
Home Energy Magazine's blog post was featured
Wednesday
Home Energy Magazine posted a blog post
Wednesday
Quinn Korzeniecki added a discussion to the group Building Performance Institute (BPI)
Thumbnail

Rebates and Incentives: Illinois

Curious about home performance incentives and rebates available in your area? Check out this BPI…See More
Wednesday
Profile IconStacey Cordeiro and Melissa Ames joined Home Energy Pros Forum
Wednesday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service