Where to find EER and SEER if it is not on the label

That's all

Judi

Views: 508

Replies to This Discussion

You will have to access the manufacturers information or you can use a Prestons Guide that will give basic ( and I do mean basic) information as to the date of manufacture and rated eff for that model condensor.  It will not show eff for condensors installed to old coils or the eff of an older unit installed to a TXV coil.  Preston's guide doesnt show any information reguarding cond & evap coil matchups.

 

 You can also try the AHRINET.ORG web site  They are the organization that certifies the efficiency and capacity of a/c's, ht pumps and such.  If you have the condensor, evap coil & furnace model #'s you can get a certified rating for that combination.  We print that off for all our customers so they know they are getting what they paid for.

I haven't used it to find older equipment so I do not know if that is possible or not.  After I finish this I will try it and let you know if it works

I tried the AHRI site to look for older units and It doesnt work for units that are no longer in production and stock is no longer available.

Older equipment is more affected by it's condition than it's original SEER. Clean coils/blower, proper charge, and good ductwork can have that older 10SEER unit actually getting it's full 10 SEER. However that usually isn't the case, most older units are full of dirt, incorrectly charged, and have poor ductwork...

RSS

Discussion Forum

HVAC integration – the past, the present, and the future

Started by Igor Mitbarg. Last reply by Lucifer Prescott Apr 11. 1 Reply

Target superheat formula

Started by Miguel Orduno. Last reply by John Proctor Feb 18, 2015. 6 Replies

Now for Something Different

Started by John Porterfield. Last reply by John Porterfield Jan 12, 2015. 2 Replies

Latest Activity

Blake Shurtz posted a discussion

Replacement for Energy Conservatory Flow-blaster

It's too bad that the flow-blaster is no longer being produced or technically supported. Does…See More
6 hours ago
Profile IconBrian Cizmar, Charles Allen, Charles Buell and 1 more joined Home Energy Pros Forum
9 hours ago
Mike Rogers posted a discussion

Home Energy Pros and #MeToo

If it doesn't seem obvious why a discussion of …See More
12 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Sean Lintow proposed rails and clips (re: first comment in this discussion), but in the context of…"
yesterday
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"I missed where the suggestion for rails came in. The plywood would not need any rails. 4+ inches is…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"I'm a little confused about the necessity and purpose of using support rails if working on…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"If you insulate master bedroom and family room from below, you definitely need more R-value than…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Brad, I was only talking about using EPS between the ridges, if necessary, to conform to bolts.…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service