REMRATE Modeling of 2 stage Heat Pumps - Including GSHP

I have a REMRATE /Modeling Question. How are people determining percentage of load when modeling two stage heat-pumps (especially GSHP) when entering load percentage for each stage?

Views: 40

Replies to This Discussion

Jeremy, I don't have the latest version so there may be a new input I'm not familiar with.

If you're talking about the Load Served (%) field on the Mechanical Equipment Properties Summary form, that field refers to the breakdown between multiple systems, which is generally based on the MJ model. For example, if there are separate systems for upstairs and downstairs, you would take a simple ratio of the MJ loads for those two zones, separately for heating and cooling. This percentage is not impacted by the equipment, so the result would be the same whether the equipment is single or multi-stage, or if the equipment is oversized, or not.

When you drill down to the equipment library form, the version I have makes no distinction between single-stage and multi-stage. If this has changed and is what your query relates to, please post a screenshot of the form and I'll try to further assist.

RSS

Discussion Forum

Manual S for Water Furnace Equipment

Started by Jeremy Begley. Last reply by Danny Gough Mar 23. 6 Replies

joining ducts

Started by Don Fugler. Last reply by Dara Bowser Nov 28, 2017. 21 Replies

HVAC integration – the past, the present, and the future

Started by Igor Mitbarg. Last reply by Lucifer Prescott Apr 11, 2017. 1 Reply

Latest Activity

Sean Wiens posted a discussion

Outdoor Reset

Can some of you weigh in on what you feel is the best wired outdoor reset and why?  I am currently…See More
4 hours ago
Tom Phillips replied to Don Fugler's discussion Choosing a range hood in the group Kitchen Ventilation
"thx Don! re: Capture Efficiency, the ROÇIS Kitchen Range Hood document addresses what hood…"
8 hours ago
Dara Bowser joined Don Fugler's group
Thumbnail

Kitchen Ventilation

In many homes, cooking is the largest indoor source of air pollutants. Exposures can be higher in…See More
8 hours ago
Dara Bowser liked Don Fugler's discussion Choosing a range hood
9 hours ago
Profile IconChris Hawkins and Drew Brauer joined Home Energy Pros Forum
yesterday
Profile IconLauren Asplen and Danny Gough joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
yesterday
Franco Oyuela commented on John White's blog post What to Expect from a New HVAC Unit Installation Cost
"Is strongly advise against attempting to install any complex home comfort equipment on your own.…"
yesterday
CEE posted a blog post
yesterday
Lindsay Bachman liked David Keefe's video
yesterday
Julie Saporito's blog post was featured
yesterday
John C. Semmelhack liked Diane Chojnowski's discussion Everything you need to know about California's new solar roof mandate
yesterday
Profile IconJohn Walter and Eric Rabesa joined Home Energy Pros Forum
Thursday
William Collins posted a video

The Foam Sealants Kit " Bead or Spray"

Now you can apply foam sealant as a " bead " or a " spray " with the Foam Sealants Kit. When using a 16lb Canister of Black Sealant you can easily go from us...
Thursday
Profile IconSean Wiens and Armando Cobo joined Don Fugler's group
Thumbnail

Kitchen Ventilation

In many homes, cooking is the largest indoor source of air pollutants. Exposures can be higher in…See More
Thursday
Julie Saporito posted a blog post
Thursday
Brennan Less replied to Linda Wigington's discussion Good Eating with Reduced Cooking Emissions in the group Kitchen Ventilation
"Cook outside, as much as you can, and close your doors/windows while you do it ;) "
Thursday
Ethan Foley joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
Thursday
Shane S posted a photo
Thursday
Al Tibbs posted photos
Wednesday
Al Tibbs commented on Eric Aune's photo
Thumbnail

IMG00173-20100805-1030

"Always remind customer to make sure to mark out location of piping before covering!! The infrared…"
Wednesday

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service