This furnace was installed two years ago in a conditioned basement.  The ductwork is a thin flexible plastic like that of a clothes dryer (but with a 6" diameter).   This is the second one that I've seen in the past year (Oregon).   Is this up to code?

 

Views: 302

Replies to This Discussion

The plastic would need to be rated for the temps the furnace delivers.  Is there a tag on the plastic?  The maufacturer would have the specs as to temp and application.  It isnt pretty but it is functional.  The specs on the plastic will give you the information you need but you might have to call the manufacturer.  I personally would be very suspect about it.   Have you performed a Temp Rise on the furnace?
This is crap work and should be redone, but is allowed by code.
I agree that the quality of work on this radial system can be called into question. But I a, very surprised to hear this would meet code. Based on the 2009 IECC, that ductwork being in unconditioned space should have a minimum R-value. Here is MA and RI, inspectors hold the contractor to this spec, R-8 outside the building envelope and R-6 for inside - in a basement like this for example. This may be a place to start regarding this particular job, looks pretty recent...
I agree that the quality of work on this radial system can be called into question. But I am very surprised to hear this would meet code. Based on the 2009 IECC, that ductwork being in unconditioned space should have a minimum R-value. Here is MA and RI, inspectors hold the contractor to this spec, R-8 outside the building envelope and R-6 for inside - in a basement like this for example. This may be a place to start regarding this particular job, looks pretty recent...

RSS

Discussion Forum

HVAC integration – the past, the present, and the future

Started by Igor Mitbarg. Last reply by Lucifer Prescott Apr 11. 1 Reply

Target superheat formula

Started by Miguel Orduno. Last reply by John Proctor Feb 18, 2015. 6 Replies

Now for Something Different

Started by John Porterfield. Last reply by John Porterfield Jan 12, 2015. 2 Replies

Latest Activity

Stuart Langley liked Chris Clay's photo
54 minutes ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Stuart, I wasn't considering the copula windows... yes, those would indeed need to be…"
2 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"Well, @David Butler, you have seen the property more accurately than I have, but my impression of…"
2 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"@ Stuart,I don't think there's any concern about impact of 4" build-up on elevation…"
3 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"So this building has a few issues with air leaks and air leaks have so much to do with discomfort…"
4 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"John Hatfield has the right idea here for a new roof deck. Polyiso boards always need a good stout…"
4 hours ago
Keith Tripp replied to Sean Lintow Sr's discussion Water Saver or Gimmick? in the group Best Practices (Residential)
"Interesting to see that recirc. has been in use for many years in some places. It is still a…"
5 hours ago
Mahendra Shah replied to John Krochmalny's discussion Psychrometric Chart Training
"John Thanks for show and tell tutorial"
5 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service