i have read in this group where someone suggested conditioned air in the attic.  This being done to make the cooling and heating equipment and duct more effective.  Please excuse me if that is NOT why you would condition the air in an attic.

Dont you have to pay for the energy used to condition those attics?  Maybe I am mistaken there too but that sounds like we are killing Cain to save Abel.  Kind of goes against my grain.

I have worked with a radiant control coating (RCC) for 30 years.   One of the first things I did was apply it to AC units and boilers in and on hospitals in association with the California Society of Healthcare Engineering.

 

With one single exception, we would NEVER recommend conditioning an attc.  We would go into the attic and coat the roof underdecking to keep the attic much cooler in the hot months and warmer in the cold months. 

 

 

We dont stop there.  We also coat the AC unit, plenum and flex / metal ducts as well as the water heater if one is present.  By just coating the AC unit, plenum, ducts and water heater, this normally reduces the entire electric bill by 25% for a 1,200 to 1,400  sq ft home.  This is all done with only the addition of our Radiant Control Coating, no R- rated insulation needed here.

 

 

 

A one time expense that will keep the attic at a comfortable temperature all year lomg. 

That is how you condition the attic with an RCC.

 

I have started a group here, 'THE RCC CLASSROOM' Stop by when you can, we have done ALOT with our RCC and AC units over the years.

 

Hal

 

 

Views: 159

Discussion Forum

joining ducts

Started by Don Fugler. Last reply by Dara Bowser 17 hours ago. 12 Replies

HVAC integration – the past, the present, and the future

Started by Igor Mitbarg. Last reply by Lucifer Prescott Apr 11. 1 Reply

Target superheat formula

Started by Miguel Orduno. Last reply by John Proctor Feb 18, 2015. 6 Replies

Latest Activity

David Byrnes's blog post was featured

Strategies for Hiring and Interviewing for Home Performance Professionals

Hire slow and fire fast.  It’s a phrase that experienced managers and human resources professionals…See More
1 hour ago
Diane Chojnowski replied to David Butler's discussion Beginners Guide: Managing Subscriptions on Home Energy Pros
"Thanks for your comprehensive guide, David! There is an RSS feed you can subscribe to at the…"
1 hour ago
Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
17 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
18 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"I never checked that before. Checking now... Section M1502.4.2 of the International Residential…"
19 hours ago
Joseph Frasier is now a member of Home Energy Pros Forum
19 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"Brendan, Thanks for that response. Because of your warning, I just went down to the basement and…"
22 hours ago
Brendan Reid replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don, Summary: DRYER VENT: screws bad idea, possibly prohibited by code. METAL DUCT: must be…"
23 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service