Historic windows present challenges when it comes to mitigating the effects of UV and thermal transfer. Providing both UV and thermal barriers for historic windows is often accomplished via some ancillary attachment. Here are a few examples, with associated pros and cons:


Insulated roller shades
- Can protect against UV while still allowing natural ventilation

- Can sometimes be concealed when not drawn (doesn't always interfere with historic import)
- Not the best possbile air or thermal barrier - e.g., in winter, can still allow for condensation to form on glass


Sealed quilt or roman shade

- This refers to a heavier, well insulated interior shade mounted on tracks that forms a reasonably good air seal around the window
- A well known brand is  Window Quilt (claimed R value from 4.6 to 7.1)

- Bulky, and may not appeal to some; may detract from historic import
- Better air/termal barrier than a roller shad, but might be less than adequate if both UV protection and natural ventilation are desired in summer


Exterior storm window
- Might help to further mitigate any air/moisture infiltration issues
- Newer ones are designed to be nearly invisible - don't detract from historic import
- Can be onerous to remove every spring and replace every fall


Use of exterior awnings, overhangs, or plantings (transpiration, shade)
- Natural, passive
- Can help extend the effects of existing heating/cooling mechanisms


In general, what approaches have any of you attempted, and what sort of results have you achieved? What seems to be a preferred strategy (or combination of strategies), or potential best practice solution to this problem?

Tags: Barrier, Preservation, Thermal, Transfer, UV, Windows

Views: 2527

Replies to This Discussion

I did an audit recently for a lady that does custom window treatments.  Curtains, blinds, drapes.  She discussed the Hunter Douglas line of blinds that she handles.  Interesting stuff.  Some have an Energy Star Label, and make claims of an R-Value.

My personal preference is for Solar control outside the envelope.  My professional guidance is that people have to do something and an effective interior solar control they will have installed and use is better than an approach that is not used or even installed.

Thanks very much Bill, for describing your exterior storm solution (sorry I'd neglected to reply when you first posted this a year ago). Question I have is: Do you drill weep holes in the bottom furring strip supporting the exterior storm? And if so, do you just leave them open or install small plugs and open or close when necessary? Thanks Bill!

Hi John,

I don't internet much either.

I install the bottom furring strip in pieces and usually have enough left over from the other 3 sides to piece together the bottom. This is the only time I use that funky PVC wood. I keep the holes small, so I feel like it is OK to leave them open all the time. I haven't had any call backs yet, though sometimes I wonder if it is wise to claim that exterior storms will eliminate interior condensation problems.

Thank you so much for starting this group, my overarching passion is to merge the craftsmanship still intact in many older buildings with technology and building science.


I'd also like to add to your "laundry list" a product that I have had some experience/frustration with, but ultimately hope for. http://www.solarizewindowinsulators.com/ It's dang intriguing if nothing else. I'd love to hear of other folks' experiences with the Inflector product.

It's basically a reversable interior storm window-- radiant barrier on one side, solar absorber on the other. It's brilliant in concept but I can't help thinking it looks like an overpriced NASA-designed trash bag.

My mother in law had three skylights facing south in her 1890's home-office. She loved the light, hated the heat, and wanted to save energy in the winter too. (Wow, that's a lot to ask of a hole in your ceiling). So I installed three Inflector panels. She hated the way they looked and took them out before I ever got any good data on their performance. I'm a little suspicious of their own data claims, as the product is outside the realm of a SHGC-defined window/ storm tests.

Hi Chris. Thanks very much for added this to the forum. The information and test data they provide seems rather substantial. But I agree with you -- it'd be great to hear from any one else who's installed these or a similar reflective barrier, and had had a chance to observe the results. Agree that it at least sounds good.

Here is my list of other professionally made interior air panels and interior "storms":

Downeast Interior Storms
Rendon Sabina
47 Chase Farm Rd.
Newcastle, Maine 04553
rendon at downeastinteriorstorms dot com

Eugene Mueller
Energy Wise Mfg

Advance Energy Panels (AEP)
James Levine
(800) 819-9463
AEP now has kits to make panels:

R-Plus Window Insulators


Hi John,

Thanks very much for contributing all this information. It looks like a few of the links were broken when I tried them. In particular, the "Buy AEP -Kit" button is broken on both the Windo-Therm and AEP home pages and I couldn't find any other obvious links that worked. On the other hand, if you Google "Advanced Energy Panels Kit", quite a number of third parties who resell them are listed. Also, the Window-Therm and AEP home pages (one in the same) are either http://www.windotherm.com/ or http://www.advancedenergypanels.com/, respectively, while the R-Plus Window Insulators home page now seems to be http://rpluswindows.com/

There's a company right in Boston that makes a very nice aluminum/low-e glass spring tension interior storm that I've seen a few times, who's name just keeps on eluding me. I need to sift though some paper files to find it (never an exciting prospect), but when I do, I'll post here as well.

Thanks again, John, and hope all is going well by you!


Both interior air panels and exterior storms are now included in the National Window Preservation Standards:

Air panels:






This is great, John. Thanks very much for posting these links here...


Larson is a manufacturer with national distribution of interior and exterior storm windows. See:  http://www.larsondoors.com/storm_windows/ for more information.

It is indeed a challenge to retain those historic windows, etc. but I think any contractor can remodel it maybe by adding blinds, etc. nothing is impossible now.


Discussion Forum

Two Part Epoxy and Repair of Structural Wood

Started by John Poole. Last reply by Patrick Michael Hayes Oct 14, 2016. 11 Replies

Historic Windows: UV and Thermal Transfer

Started by John Poole. Last reply by Shade Structures Jan 31, 2013. 23 Replies

Historical Window Energy Efficiency Upgrade Standards?

Started by David Clark. Last reply by Robert R Gilbert Jul 13, 2011. 11 Replies

Historic Windows: Air/Moisture Infiltration

Started by John Poole. Last reply by Bill Bradbury Jul 10, 2011. 1 Reply

Spanish Style Architecture Wall Construction Details

Started by John Nicholas. Last reply by Bill Bradbury Jun 29, 2011. 2 Replies

Latest Activity

Armstrong SMith replied to Bruce Navin's discussion LED's interfering with Garage Door Openers
"No one replied! ."
2 hours ago
Kevin Jacks replied to Arn McIntyre's discussion Retrotec Door Fan For Sale in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"Are you willing to ship?"
4 hours ago
Kevin Jacks joined allen p tanner's group

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
4 hours ago
Walter Ahlgrim replied to Pamela Brown's discussion Condensation on an interior wall of a detached garage.
"Do not be fooled it is very common problem for cast iron wood working equipment to sweat and rust…"
12 hours ago
David Eakin commented on Bruce Sullivan's blog post Solving Energy Poverty: Energy Efficient Homes for Those Who Need Them Most
"Most all residential buildings are built with a 50-year life cycle. If the building stock in…"
17 hours ago
Profile IconTaylor Joseph Mckay and Karin Haerter joined Home Energy Pros Forum
21 hours ago
Arn McIntyre replied to Arn McIntyre's discussion Retrotec Door Fan For Sale in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"Dave I am selling everything as one package"
23 hours ago
Dave Ransom replied to Arn McIntyre's discussion Retrotec Door Fan For Sale in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"What's your price for the DM2?"
Jose Macho commented on Bruce Sullivan's blog post Solving Energy Poverty: Energy Efficient Homes for Those Who Need Them Most
"There is no one-size-fits all answer...It would be interesting to see some real data on low income…"
Mick Lane replied to Pamela Brown's discussion Condensation on an interior wall of a detached garage.
"For condensation you need one simple condition. A surface below the dew point. There are lots of…"
Tom White liked Home Performance Coalition's blog post Two Ways YOU Can Be A Face of EE
Mick Lane replied to Mark Furst's discussion Worst boiler ever?
"Nice.  Probably want to clean the orifices on the burner. That firebox is a little too full of…"
Home Energy Magazine's video was featured

Legends of Home Performance: Sam Rashkin, Chief Architect, Building Technologies Office, U.S. Department of Energy

Home Energy Magazine's series "Legends of Home Performance". "There's reason for us to be excited from environmental, economic, health perspectives, for the ...
Diane Chojnowski added 2 discussions to the group News & Announcements
Profile IconRon Piethe and Ali Alajmi joined Home Energy Pros Forum
Paul Morin replied to Griffin Hagle's discussion Which is the valid draft test?
"I agree that checking for combustion spillage is more important that checking for draft.  It…"
Jose Macho replied to Griffin Hagle's discussion Which is the valid draft test?
"Forget the draft measurement issue,,, just look at that incorrectly applied pipe wrap next to the…"
Home Performance Coalition posted blog posts
Home Performance Coalition's blog post was featured

Two Ways YOU Can Be A Face of EE

Want to help advance our industry, without spending time on policy advocacy? Here are two simple,…See More
Claude... liked Eric Beriault's discussion HERs Rater - Home Energy Rater: East Bay


  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service