MERV, or Minimum-Efficiency Reporting Value, is a measure of the efficiency with which filters remove particles of specific sizes.

According to the Standard 52.2 application guidelines, particles in this size range include pollen, dust mites, mold spores, hair spray, powdered milk, and, of course, snuff. Higher
MERV ratings (from 13 to 16) are needed to remove bacteria and smoke
particles. At the top of the scale are HEPA filters with MERV ratings
from 17 to 20, which can filter out particles smaller than 0.3 microns,
including some viruses.

 It stands to reason that the ability to filter smaller particles would come with the penalty of increased resistance to air flow. Could the shift to better filters mean that they could
cause problems with inadequate air flow or greater fan energy use? Are
all high-MERV filters equal, or do some have less pressure drop than
others? How much better are 2-inch and 4-inch-thick pleated filters than
1-inch filters? Are larger ducts required to offset the added pressure
drop of the filter? With a pat on the back from our Building America
program sponsors, my colleagues and I at Davis Energy Group, in Davis,
California, decided to run some tests to answer these questions.

 

Read David Springer's article in the November/December, 2009 issue of Home Energy.

Views: 170

Discussion Forum

Got insulation?

Started by Debra Little. Last reply by Jason Raddenbach May 25. 2 Replies

Return Possum

Started by Stefan Peter-Contesse. Last reply by Alice La Pierre Oct 26, 2015. 1 Reply

Easy Water Heater Venting

Started by Kari Sauder. Last reply by Matthew Lutz Oct 23, 2014. 22 Replies

Thank-less water heater

Started by Andy Simms. Last reply by Dennis Heidner Jun 13, 2013. 12 Replies

Latest Activity

Chris Dorsi posted an event
Thumbnail

2018 Habitat X Summer National Conference at Big Sky Montana

June 27, 2016 to June 29, 2016
The 2018 Habitat…See More
5 hours ago
Stuart Langley liked David Byrnes's blog post Strategies for Hiring and Interviewing for Home Performance Professionals
9 hours ago
Kevin Miller replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Visual inspection can only confirm the presence of mold, not the absence.   That said,…"
12 hours ago
Armand C Magnelli replied to Don Fugler's discussion joining ducts in the group HVAC
"I often suggest pop-rivets as an alternative to sheet metal screws for both clothes dryer duct work…"
13 hours ago
Kevin Miller replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Sampling would be primarily to verify 'Condition 1' or 'Normal Fungal Ecology'…"
13 hours ago
Daniel Cullen joined Building Performance Institute's group
Thumbnail

Building Performance Institute (BPI)

BPI is the nation's premier standards development, quality assurance and credentialing organization…See More
13 hours ago
Daniel Cullen replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Can anyone tell me exactly HOW mold sampling impacts the mold remediation process or protocol? Why…"
13 hours ago
Daniel Cullen joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
13 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service