Tags: trouble, venting

Views: 388

Replies to This Discussion

Found this in the basement of our recent purchase.  Only thing worse than one long horizontal vent is two.  Our HVAC guy looked at the big blob of white cement at the chimney breech and said, "That's scary".  Fortunately the price was right and we will be putting a 95% AFUE sidewall vented unit in for a replacement. (And a power vented WH).

You didn't even need a level to show the negative slope on those.  Wow!  Scary Indeed! The only thing worse would be disconnected before the chimney - and these might have been!

Look on the bright side... you could have gotten this: http://inspectorsjournal.com/forum/pop_img_preview.asp?usersImgPath...

yep --people get creative with their venting options-- thanks for sharing.

you made a good purchase.   With a stone/brick chimney takes a 50-60,000 BTU/hr to keep the draft up.  Look at the top of furnace full of rust and drips its not drafting 

I don't think there was much of a draft.  The tops of both furnace and WH were pretty rusty.  But then the furnace had not been used in a while probably b/c there were two kerosene cans in the yard -- can anyone say orphaned water heater?  But then there were so many bypasses (no sheeting on the house above the porch ceilings & balloon framing basement to attic) that the plumbing inside the house was not safe from freezing so the CO probably didn't have too much chance to stay!  This week temps dipped below zero here and we were forced to take some hours in the basement for air-sealing -- band joist on a stone foundation = $80 of spray foam.  Already brought the temp of the basement up 20 deg. (heating with elec. space heaters last month was expensive-- can't hardly wait for the HVAC guy to get here with the gas furnace)

YIKES! I'm glad you got that fixed up.

RSS

Discussion Forum

Got insulation?

Started by Debra Little. Last reply by Jason Raddenbach May 25. 2 Replies

Return Possum

Started by Stefan Peter-Contesse. Last reply by Alice La Pierre Oct 26, 2015. 1 Reply

Easy Water Heater Venting

Started by Kari Sauder. Last reply by Matthew Lutz Oct 23, 2014. 22 Replies

Thank-less water heater

Started by Andy Simms. Last reply by Dennis Heidner Jun 13, 2013. 12 Replies

Latest Activity

Profile IconSean Wiens and David Butler joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
2 hours ago
Profile IconSean Wiens and David Butler joined Mark Richardson's group
Thumbnail

Renewable Energy

This group will focus on the issues associated with incorporating renewable energy sources like…See More
2 hours ago
Al Tibbs posted photos
3 hours ago
Al Tibbs replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"In any case where there is visible mold present, I would begin with a thorough VISUAL assessment of…"
3 hours ago
Al Tibbs joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
3 hours ago
David Byrnes posted a blog post

Strategies for Hiring and Interviewing for Home Performance Professionals

Hire slow and fire fast.  It’s a phrase that experienced managers and human resources professionals…See More
4 hours ago
David Butler posted discussions
4 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"Static pressure drop through a straight length of pipe is a function of friction rate, and friction…"
9 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service